53
Operating Instructions
Specifications
(continued)
[USB connection]
●
This may vary depending on the operating environment.
Video output:
USB Video Class Ver1.0
Video compression format:
Motion JPEG
Audio output:
USB Audio Class Ver1.0
Audio compression format:
Linear PCM, 48 kHz, 16-bit,
2 channels
Transfer modes:
Image
Resolution
Frame rate*
System
frequency
59.94 Hz
System
frequency
50 Hz
JPEG
3840×2160
5p
5p
1920×1080
30p
15p
5p
25p
12.5p
5p
1280×720
640×360
*: The frame rate may be lower than the setting depending on the
operating conditions.
Supported models:
Devices standardly equipped with a
USB 2.0 compatible port
[Pan-tilt head unit]
Installation method: Stand-alone (Desktop) or
suspended (Hanging)
●
To ensure safety, the unit must be
secured using the mount bracket
supplied.
Camera/pan-tilt head control:
IP connecting
cable
When connecting through a hub:
LAN cable* (category 5 or above),
max. 100 m (328 ft)
When using a PoE+ hub:
LAN cable* (category 5e or above),
max. 100 m (328 ft)
When a hub is not used:
LAN cable* (category 5 or above),
max. 100 m (328 ft)
AW protocol
connecting cable
LAN cable* (category 5 or above,
straight cable), max. 1000 m (3280 ft)
Standard
protocol
connecting cable
Mini DIN 8-pin cable, male
*: Use of an STP (shielded twisted pair) cable is
recommended.
Pan/tilt operation speed:
Maximum speed during preset:
300°/s
Maximum speed during manual:
90°/s
Panning range: ±175°
Tilting range:
–30° to 90°
●
Depending on the pan or tilt
position, the camera may be
reflected in the image.
Quietness:
During preset: NC40 or less
During manual: NC35 or less
