Panasonic AW-UE20KE, Operating Instruction

Page: 25 / 126

25
Wireless Remote Control (optional accessory)
You can operate the unit with the optional wireless remote control (AW-RM50AG).
Consult your dealer concerning the purchase of a wireless remote control.
Buttons used for operating this unit are described.
1
2
3
5
7
6
8
9
10
11
12
13
14
4
1
Signal transmission window
2 ON/STANDBY button
Each time this is pressed for 2 seconds, operation switches between turning
on the unit‘s power and establishing the standby status.
3 [CAMERA 1] to [CAMERA 4] buttons
Selects a camera to be operated.
Once a button has been selected, the unit corresponding to the selected
button can be operated.
4 SET button
If this button is pressed when the [AWB A] memory or [AWB B] memory has
been selected for the white balance adjustment, the white balance is
automatically adjusted and registered in the selected memory.
5 MODE button
Each time you press the button, the signal switches between the color bar
signal output and the camera image output.
6 GAIN buttons [OFF] [LOW] [HI] [AUTO]
These are used to set the gain.
The gain increase can be set in three steps using the
[OFF], [LOW] and [HI] buttons.
[OFF] is set to 0 dB, [LOW] is set to 9 dB, and [HI] is set to 18 dB.
When the [AUTO] button is pressed, the AGC function is activated, and the
gain is adjusted automatically depending on the light quantity.
The maximum gain of the AGC function can be set using the camera menu.
7 1 to 12 buttons
These are used to call the information on the unit’s directions and other
settings, which have been registered in the units preset memories No.1 to
No.12, and reproduce those settings.
Setting in preset memories No.13 and above cannot be called from the
wireless remote control.
8 PRESET button
Press this button and any of the buttons from 1 to 12 simultaneously to
register a preset memory.