Panasonic AW-RP60G Operating Instructions Manual Download Page 65

Page: 65 / 90

Menu

(continued)

SETTING

Make basic settings for preset memory.

The setting values and available setting items depend on the connected camera.

SETTING 1/2

SCOPE

CAMERA

NO?

SLOW

OFF

RP CTRL

SPD MODE

SPEED

TBL

D-EXT

CROP

ZOOM

MODE

AW-UE70

NO?

HOME

STEP

SPEED

UNIT

SETTING 2/2

PMEM

GP CAL

GROUP1

AW-UE70

___ indicates factory default settings.

Item

Setting value

Setting details

SCOPE

Specify the playback targets for items registered in the tracing memory.

Pan, Tilt, Zoom (including digital zoom), Focus, Iris, Gain, white balance adjustment value

Pan, Tilt, Zoom (including digital zoom), Focus, Iris

Pan, Tilt, Zoom (including digital zoom), Focus

RP CTRL SPD MODE

CAMERA

Determine the playback mode of the preset speed for playing back the preset memory.

CAMERA:

Playing back at the preset speed set in the remote camera.

RP:

Playing back at the preset speed registered when the preset memory was registered.

HOME

YES

NO?

Return the pan‑tilt head to home position.

SPEED UNIT

STEP

TIME

The mode of the speed for playing back the preset memory is displayed.

The setting is only enabled on remote cameras that have the SPEED UNIT function.

This is only enabled with remote cameras where it is possible to specify times with PRESET

SPEED.

STEP:

Playback moves to the preset position at the specified speed.

TIME:

Playback moves to the preset position in the specified time.

SPEED TBL

SLOW

FAST

Set the mode of the speed when playing back preset memory.

Summary of Contents for AW-RP60G



























































































Search results

Summary of Contents for AW-RP60G

Reviews:

Panasonic AW-RP60G, Operating Instructions Manual, Page: 65 / 90

Search results

Summary of Contents for AW-RP60G

Reviews: