background image

13

Parts and their functions 

(continued)

Color adjustment section

AWB

ABB

BARS

BARS button [BARS]

Use this to select the video signal output from the remote camera.

Each press switches between the signal for the images shot by the 

camera and the color bar signal.

Off :

Outputs the signal for the images shot by the camera

On :

Outputs the color bar signal

AWB button [AWB]

Use this to execute automatic adjustment of the white balance and 

then register the adjustment result to memory A or B of the remote 

camera.

The AWB button indicator turns on during white balance adjustment 

and turns off when adjustment is successful.

The indicator blinks when adjustment is not possible.

z

z

When automatic adjustment of the white balance ends, the R GAIN 

and B GAIN values become ±0.

ABB button [ABB]

Use this to execute automatic adjustment of the black balance.

When the button is pressed, adjustment is performed by 

automatically closing the iris.

The ABB button indicator turns on during black balance adjustment 

and turns off when adjustment is successful.

The indicator blinks when adjustment is not possible.

Preset memory selection section

PRESET MEMORY SELECTION

1

2

3

4

5

6

7

8

9

10

STORE

DELETE

PRESET

STORE button [PRESET STORE]

When holding down the STORE button, it will light up and a preset 

can be registered. When any of the preset memory selection buttons 

(

I

) is pressed in this condition, the registration of preset is complete.

To cancel the preset registration, press the STORE button to turn it 

off.

DELETE button [PRESET DELETE]

When holding down the DELETE button, the preset can be deleted. 

When any of the preset memory selection buttons (

I

) is pressed in 

this condition, the deletion of preset is complete.

After the preset is deleted, the button turns off.

To cancel DELETE before executing it, press the button.

I

Preset memory selection buttons

[PRESET MEMORY SELECTION 1 to 10]

Use these to recall the preset of the preset group that was set on the 

status screen.

STORE button (

)

 

is lit:

Use these to register the number of the preset in the preset group 

that was set in the status screen.

DELETE button (

)

 

is lit:

Use these to delete the data of the preset in the preset group that 

was set in the status screen.

User button section

USER 1

USER 2

USER 3

SHIFT

USER 4

USER buttons [USER 1] to [USER 4]

Use these to access the functions assigned to USER 1 to USER 4.

Off :

The function is disabled.

On :

The function is enabled.

SHIFT button [SHIFT]

When the button is lit, USER buttons 1 to 4 change to USER buttons 

5 to 8.

The USER 5 to 8 are displayed in the USER settings on the status 

screen.

Summary of Contents for AW-RP60G



























































































Reviews: