6
System upgrading
O I
[1] Connections
An example of the basic connections is presented below.
[2] Recommended system
requirements
1) Personal computer
Provide a Windows-compatible personal
computer (PC) with the following performance
specifications:
• Pentium III
: 500 MHz or higher
• Memory size: 64MB or more
• Network interface card
2) Operating system
Provide any of the following versions of Windows:
• Windows 98
• Windows ME
• Windows 2000
3) Browser software
Provide one of the following browsers in the
versions specified:
• Internet Explorer 5.5
• Netscape 4.7
Windows PC
Windows PC
HUB
AW-PS505
AC adapter
Install the WEB card
(AW-PB309) in the
convertible camera.
10Base-T
UTP-5 cable
(max. 100 m)
<Notes>
≥
An adequate picture tracing performance will
not be achieved if the PC’s performance is too
low.
≥
It may not be possible to achieve the prescribed
performance or operation may become
unstable when a Windows or browser version
other than the ones recommended is used.
≥
Do not simultaneously install other application
software (such as a word processing or
spreadsheet program) in addition to the
browser. Doing so may cause operation to
become unstable.
• Pentium is a registered trademark of Intel
Corporation.
• Windows, Windows 98, Windows ME, Windows
2000 and Internet Explorer are registered
trademarks of Microsoft Corporation.
• Netscape is a registered trademark of Netscape
Communication.
• Other company names or product names provided
on this product are the trademarks or registered
trademarks of the companies concerned.
[3] Installation and settings at the PC end
1.
Install one of the recommended versions of Windows in the PC.
Follow the instructions provided with the Windows version concerned.
2.
Install one of the recommended browsers by following the instructions provided with the software
concerned.
3.
First, set the IP address of the WEB card. Set the IP address at the PC end as described on the
following page in order to make the connection with the PC in the WEB card’s initial setting status.
