background image

- 4 -

  1) Read these instructions.

  ) Keep these instructions.

  3) Heed all warnings.

  4) Follow all instructions.

  5)  Do  not  use  this  apparatus  near 

water.

  6) Clean only with dry cloth.

  7)  Do  not  block  any  ventilation 

openings. Install in accordance with 
the manufacturer’s instructions.

  8)  Do  not  install  near  any  heat 

sources  such  as  radiators,  heat  
r e g i s t e r s,   s t ove s,   o r   o t h e r 
apparatus  (including  amplifiers) 
that produce heat.

  9)  Do  not  defeat  the  safety  purpose 

of  the  polarized  or  grounding-
type  plug.  A  polarized  plug  has 
two blades with one wider than the 
other.  A  grounding-type  plug  has 
two  blades  and  a  third  grounding 
prong. The wide blade or the third  
prong are provided for your safety.  
If  the  provided  plug  does  not  fit  
into  your  outlet,  consult  an 
electrician  for  replacement  of  the 
obsolete outlet.

  10)  Protect the power cord form being 

walked  on  or  pinched  particularly 
at plugs, convenience receptacles, 
and the point where they exit from 
the apparatus.

  11)  Only use attachments/accessories 

specified by the manufacturer.

  1)  Use only with the cart, 

stand, tripod, bracket, 
or  table  specified  by 
the  manufacturer,  or 
sold 

 

  with the apparatus. When a cart is  

used,  use  caution  when  moving 
the  cart/apparatus  combination  to 
avoid injury from tip-over.

  13)  Unplug  this  apparatus  during 

lightning  storms  or  when  unused 
for long periods of time.

  14)  Refer  all  servicing  to  qualified 

service  personnel.  Servicing  is 
required  when  the  apparatus  has 
been  damaged  in  any  way,  such 
as  power-supply  cord  or  plug  is 
damaged,  liquid  has  been  spilled 
or  objects  have  fallen  into  the 
apparatus, the apparatus has been 
exposed  to  rain  or  moisture,  does 
not operate normally, or has been 
dropped.

Read these operating instructions carefully before using the unit. Follow the safety 
instructions  on  the  unit  and  the  applicable  safety  instructions  listed  below.  Keep 
these operating instructions handy for future reference.

IMPORTANT SAFETY 

INSTRUCTIONS

 indicates safety information.

Safety precautions

Summary of Contents for AW-PB305AN





















Reviews: