background image

-  -

 indicates safety information.

CAUTION

RISK OF ELECTRIC SHOCK

 DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, 

DO NOT REMOVE COVER (OR BACK).

NO USER SERVICEABLE PARTS INSIDE.

REFER TO SERVICING TO QUALIFIED SERVICE PERSONNEL.

The  exclamation  point  within  an  equilateral  triangle  is  intended  to  alert 
the  user  to  the  presence  of  important  operating  and  maintenance 
(service) instructions in the literature accompanying the appliance.

The  lightning  flash  with  arrowhead  symbol,  within  an  equilateral  triangle, 
is  intended  to  alert  the  user  to  the  presence  of  uninsulated  “dangerous 
voltage” within the product’s enclosure that may be of sufficient magnitude 
to constitute a risk of electric shock to persons.

FCC Note:

This equipment has been tested and found to comply with the limits for a class A  
digital  device,  pursuant  to  Part  15  of  the  FCC  Rules.   These  limits  are  designed  
to  provide  reasonable  protection  against  harmful  interference  when  the   
equipment  is  operated  in  a  commercial  environment.   This  equipment  generates,  
uses,  and  can  radiate  radio  frequency  energy,  and  if  not  installed  and  used  in  
accordance  with  the  instruction  manual,  may  cause  harmful  interference  to  radio  
communications.    Operation  of  this  equipment  in  a  residential  area  is  likely  to  
cause  harmful  interference  in  which  case  the  user  will  be  required  to  correct  the  
interference at his own expense.

Warning:

To  assure  continued  FCC  emission  limit  compliance,  the  user  must  use   
only  shielded  interface  cables  when  connecting  to  external  units.    Also,  any   
unauthorized  changes  or  modifications  to  this  equipment  could  void  the  user’s  
authority to operate it.

This Class A digital apparatus complies with Canadian ICES-003.

Cet  appareil  numérique  de  la  class  A  est  conforme  à  la  norme 

NMB-003 du Canada.

For CANADA

Safety precautions

Summary of Contents for AW-PB305AN





















Reviews: