16
Stand-alone installation
(when the mount bracket is going to be used) (continued)
5
Check the mounting.
6
Connect the rear panel connectors.
LAN cable
HDMI cable
AC adaptor
cable
Cable clamp
Strap part
●
How to secure the AC
adaptor cable
A
Loosely secure the cable
clamp.
B
Fasten the cable clamp.
Loosely secure the cable clamp
in the area shown above.
Take hold of the strap part, slide
the cable clamp until it stops
moving, and then secure it tightly.
RS-232C cable
LAN cable
(for RS-422)
●
Always disconnect the power supply before connecting or disconnecting cables.
Connecting or disconnecting cables while the power is turned on may result in malfunctions.
Note
The unit is in the standby condition when the AC adaptor is connected.
The primary circuit is always “live” as long as the AC adaptor is connected to an electrical outlet.
Note for connecting with an HDMI cable
When connecting with an HDMI cable using an HDMI-to-DVI converter, etc., be sure to connect the HDMI cable to the
connector of the AW-HN40/AW-HN38 last.
Connecting the HDMI cable to the connector of the AW-HN40/AW-HN38 first may result in malfunction.
2
1
AW-HN40/AW-HN38
HDMI cable
HDMI-to-DVI converter, etc.
Switcher
Monitor
