63
Web screen configurations
Logging into the Web setup screen [Setup]
1.
Turn on the power of the unit from the standby
mode state.
2.
Click the [Setup] button. (page 56)
The login screen appears.
3.
Enter the user name and password.
The factory settings for the user name and password are
as follows.
User name
admin
Password
12345
4.
Click the [OK] button.
Click [OK] again when the following screen appears.
●
While the initial settings remain used for the user
name and password, a message prompting the user
to change the user name and password is displayed
after authorization. In order to ensure security, the
password for the user name of “admin” must be
changed without fail.
It is also recommended that the password be
changed at regular intervals.
●
During Standby mode, the [Setup] button is
disabled, and you cannot switch to the web setup
screen [Setup].
Notes
Summary of Contents for AW-HE38HKPC
Page 139: ...139 Memo ...
Page 140: ...Web Site http www panasonic com Panasonic Corporation 2017 ...
