Panasonic AW-HE38HKPC, Operating Instructions Manual

Page: 26 / 140

26
Basic operations
(continued)
●
Color temperature setting (COLOR
TEMP)
1
Press the [MENU] button on the AW-RP50.
The [MENU] button lights, and the [PRESET MEMORY/
MENU] buttons become selectable.
2
Press the [4 (AWB/ABB)] button in the [PRESET
MEMORY/MENU] area.
The button lights, and the AWB/ABB menu appears on
the LCD panel.
3
Turn the F1 dial to select “VAR”.
Color temperature configuration is enabled when “VAR”
is selected, and it is initially set to the color temperature
held on the camera.
To adjust the setting, proceed to the following.
4
Press the [8 (CAMERA)] button in the [PRESET
MEMORY/MENU] area.
The button lights, and the GROUP menu appears on the
LCD panel.
5
Turn the F1 dial to select “COLOR TEMP”, then
press the F1 dial.
The color temperature appears on the bottom right (F2
area) of the LCD panel.
6
Turn the F2 dial to select the color temperature,
then press the F2 dial.
●
Preset speed table setting (PRESET
SPEED)
1
Press the [MENU] button on the AW-RP50.
The [MENU] button lights, and the [PRESET MEMORY/
MENU] buttons become selectable.
2
Press the [9 (SETUP)] button in the [PRESET
MEMORY/MENU] area.
The button lights, and the SETUP menu appears on the
LCD panel.
3
Turn the F1 dial to select “PRESET”, then press
the F1 dial.
4
Turn the F1 dial to select “PRESET SPEED”,
then press the F1 dial.
“Slow” or “Fast” appears on the bottom right (F2 area) of
the LCD panel.
5
Turn the F2 dial to select “Slow” or “Fast”, then
press the F2 dial.