manualshive.com logo in svg

Panasonic AW-HE145KE, Operating Instructions Manual, Page: 87 / 156

Share
Download
Panasonic AW-HE145KE Operating Instructions Manual Download Page 87

Tally

[Disable, Enable]

[Disable] or [Enable] is set here for the function which turns on or 

turns off the tally lamp using the tally control signal.

Factory settings: 

Enable

Tally LED Limit

Sets whether to limit the lighting of the tally lamp for each of the tally 

control signal colors (R/G).

R [Limit, Unlimit

*

]

G [Limit, Unlimit

*

]

Limit

Limit the lighting of the tally lamp.

Unlimit

Light the tally lamp.

*

 : Factory settings

<NOTE>

• If [Disable] is selected for [Tally], the tally status display on external 

devices (the web screen, controllers such as AW-RP150 and 

AW-RP60) is also disabled along with the limiting of the tally lamp 

lighting on this unit.

• If [Limit] is selected for [Tally LED Limit], only lighting of the tally 

lamp of this unit is limited. The tally status display on external 

devices (the web screen, controllers such as AW-RP150 and AW-

RP60) remains enabled.

Tally Brightness [Low, Mid, High]

Adjust the brightness of the tally LED.

Factory settings: 

Low

Status Lamp

[Disable, Enable]

[Disable] or [Enable] is set here for the status display lamp.

When you want the status display lamp to stay off while this unit is in 

operation, set to [Disable].

Factory settings: 

Enable

<NOTE>

• Even when set to [Disable], the status display lamp may light 

up when this unit is starting up, updating firmware, or trouble is 

occurring.

External Output

Select the signal type output from the External Output signal lines 

(Output1, Output2) of the RS‑422 connector. (→ page 16)

Output1 [Off

*

, R‑Tally, G‑Tally]

Output2 [Off

*

, R‑Tally, G‑Tally]

Off

Signal is not output.

R-Tally

The reception status of the red tally signal is output.

G-Tally

The reception status of the green tally signal is output.

*

 : Factory settings

„

z

Pan/Tilt

The setting is confirmed with the [Set] button.

Install Position

[Desktop, Hanging]

[Desktop] or [Hanging] is selected here as the method used to install 

the unit.

Desktop Stand-alone installation
Hanging Suspended installation

Factory settings: 

Desktop

<NOTE>

• When [Hanging] has been selected, the top, bottom, left and right 

of the images will be reversed, and up/down/left/right control for 

panning and tilting will also be reversed.

Smart Picture Flip

Mode [Off, Auto]

When the tilt becomes the angle set for [Flip Detect Angle], the image 

will be flipped in the vertical direction automatically.

Off

The picture is not turned upside down.

Auto

The picture is automatically turned upside down.

Factory settings: 

Off

Flip Detect Angle [60deg to 120deg ]

Set the tilt angle at which the image will be flipped in the vertical 

direction automatically when [Smart Picture Flip] is set to [Auto].

Factory settings: 

90deg

P/T Speed Mode [Normal(60deg/s), Fast(180deg/s), 

Quick(60deg/s)]

Set the speed of pan/tilt operation.

Normal 

(60deg/s)

Pan/tilt operates at normal speed (maximum about 60° per 

second).

Fast 

(180deg/s)

Pan/tilt operates at fast speed (maximum about 180° per 

second).

Quick 

(60deg/s)

Pan/tilt operates at normal speed (maximum about 60° per 

second) and acceleration and deceleration (rise time and 

fall time) are faster.

Factory settings: 

Normal(60deg/s)

<NOTE>

• The pan/tilt operation noise may increase when [Fast(180deg/s)] is 

selected.

• Even when [Fast(180deg/s)] is selected, the pan/tilt speed during 

preset playback will be the same speed as when [Normal(60deg/s)] 

is selected.

86

87

Web screen configurations  (continued)

Summary of Contents for AW-HE145KE





























































































































































Reviews:

No comments