Panasonic AW-HE145KE, Operating Instructions Manual, Page: 23 / 156

Wireless remote control: AW-RM50AG (optional
accessory)
SET MODE ON
ー
OPT
ー
OFF
OFF LOW HI AUTO
MENU
CAMERA
GAIN
1 2 3 4
1
4
7
10 11 12
8 9
5 6
2 3
PRESET MEMORY
PRESET
LIMIT
HOME
FOCUS ZOOM
FAST
SLOW
F T
W
N
AUTO AUTO
MANU MANU
FOCUS
+
-
IRIS
1
3
14
15
17
21
19
22
20
16
4
5
6
7
8
9
10
11
18
12
13
2
1.
ON/STANDBY button < >
Each time this is pressed for 2 seconds, operation switches between
turning on the unit’s power and establishing the standby status.
2.
Signal transmission window
3. MENU button <MENU>
Each time this is pressed for 2 seconds, operation switches between
displaying the unit’s camera menu and exiting the camera menu.
When it is pressed quickly (for less than 2 seconds) while a camera
menu is displayed, the setting change is canceled.
Furthermore, the pan and tilt movement range limits (limiters) are set
and released by operating the <MENU> button, <PRESET/LIMIT>
button and the pan/tilt buttons (<
4
> <
5
> <
b
> <
a
>).
For details, refer to “Setting/releasing the limiters” (→ page 138).
<NOTE>
• It is not possible to switch the 3G SDI and HDMI output camera
menu displays in the factory settings. Switch the setting to [Off] with
the camera menu. (→ page 58)
4. CAMERA buttons <1> to <4>
Selects a camera to be operated.
Once a button has been selected, the unit corresponding to the
selected button can be operated.
5.
SET button <SET>
If this button is held down for 2 seconds when the [AWB A] memory or
[AWB B] memory has been selected for the white balance adjustment,
the black balance is adjusted automatically and registered in the
memory selected.
When this button is pressed for under 2 seconds, only the white
balance is adjusted automatically.
6. MODE button <MODE>
This is used to select the video signals which are output from the unit.
Each time it is pressed, the signals are switched between the color
bar signals and camera video signals.
<NOTE>
• When [Audio] is set to [On] and the color bar is displayed, a test
sound (1 kHz) is output. Be cautious of the volume on external
devices.
7. GAIN button <OFF> <LOW> <HI> <AUTO>
These are used to set the gain.
The gain increase can be set in three steps using the <OFF>, <LOW>
and <HI> buttons.
<LOW> is set to 9 dB, and <HI> is set to 18 dB.
When the <AUTO> button is pressed, the AGC function is activated,
and the gain is adjusted automatically depending on the light quantity.
The maximum gain of the AGC function can be set using the camera
menu.
8.
PRESET MEMORY buttons <1> to <12>
These are used to call the information on the unit’s directions and
other settings, which have been registered in the unit’s preset
memories No.1 to No.12, and reproduce those settings.
Settings in preset memories No.13 and above cannot be called from
the wireless remote control.
9.
PRESET/LIMIT button <PRESET/LIMIT>
This is used to register the settings in the preset memories or set or
release the limiters.
When a PRESET MEMORY button is pressed while the <PRESET/
LIMIT> button is held down, the information on the unit’s current
direction and other settings is registered in the call button.
PRESET MEMORY buttons <1> to <12> correspond to the unit’s
No.1 to No.12 preset memories.
Furthermore, the pan and tilt movement range limits (limiters) are set
and released by operating the <PRESET/LIMIT> button, <MENU>
button and the pan/tilt buttons (<
4
> <
5
> <
b
> <
a
>).
For details, refer to “Setting/releasing the limiters” (→ page 138).
22 23
Parts and their functions (continued)