Matrix Type [Normal, EBU, NTSC, User]
Select the type of color matrix.
The setting is confirmed with the [Set] button.
Normal
This item is used to load the preset color matrix data and
compensate for the saturation and color phase.
EBU
NTSC
User
On the [Matrix] screen, the [Linear Matrix] and [Color
Correction] values can be adjusted by the user.
Factory settings:
Normal
Adaptive Matrix [Off, On]
Set Off/On the function that suppresses the linear matrix to suit the
shooting conditions.
Factory settings:
Off
Matrix Settings
Linear Matrix
This can be set when [User] has been selected as the [Matrix Type]
setting.
R-G
Adjust the color to between –63 and +63 for each axis
direction.
R-B
G-R
G-B
B-R
B-G
Factory settings:
(→ page 69)
Color Correction
This can be set when [User] has been selected as the [Matrix Type]
setting.
Adjust the saturation and hue for each color.
Saturation [–63 to +63]
Adjust the saturation for each color.
Phase [–63 to +63]
Adjust the hue for each color.
B_Mg
Color between blue and magenta
Mg
Magenta
Mg_R
Color between magenta and red
Mg_R_R
Color with a 1:3 magenta to red ratio
R
Red
R_R_YI
Color with a 3:1 red to yellow ratio
R_Yl
Color between red and yellow
R_Yl_Yl
Color with a 1:3 red to yellow ratio
Yl
Yellow
Yl_Yl_G
Color with a 3:1 yellow to green ratio
Yl_G
Color between yellow and green
G
Green
G_Cy
Color between green and cyan
Cy
Cyan
Cy_B
Color between cyan and blue
B
Blue
Factory settings:
(→ page 70)
Lens setting screen [Lens]
The setting is confirmed with the [Set] button.
Focus Mode [Manual, Auto]
Select auto or manual mode for the focus adjustment function.
Manual
Adjust focus manually.
Auto
Always adjust focus automatically.
Factory settings:
Auto
Zoom Mode [Opt.Zoom, i.Zoom, D.Zoom]
Set the maximum magnification rate for zoom.
Opt.Zoom
Use only optical zoom.
Optical zoom up to 20× is possible.
i.Zoom
Enable the i.Zoom function.
When this function is enabled, digital zoom is used while
reducing image degradation.
Up to 32× zoom is possible combining optical zoom and
digital zoom.
D.Zoom
Enable the digital zoom function.
Higher digital zoom magnifications will result in coarser
images.
Factory settings:
Opt.Zoom
Max Digital Zoom
[×2, ×3, ×4, ×5, ×6, ×7, ×8, ×9, ×10]
Set the maximum digital zoom magnification.
This is only enabled when [Zoom Mode] is set to [D.Zoom].
Factory settings:
×10
<NOTE>
• Higher digital zoom magnifications will result in coarser images.
Digital Extender [Off, ×1.4, ×2.0]
Make settings for the digital extender function.
Off
Turn the digital extender function off.
×1.4
The digital zoom will be fixed at 1.4×.
×2.0
The digital zoom will be fixed at 2.0×.
This is only enabled when [Zoom Mode] is set to [Opt.Zoom].
Factory settings:
Off
OIS [Off, On]
Turn the optical image stabilization (OIS) function off/on.
<NOTE>
• The optical image stabilization (OIS) function’s level of correction is
reduced during pan/tilt operations.
Factory settings:
Off
106
107
Web screen configurations (continued)
Summary of Contents for AW-HE145KE
Page 102: ...z zPicture 102 Web screen configurations continued ...
Page 155: ...155 MEMO ...