Panasonic AVHS400AN - MULTI-FORMAT LIVE SWITCHER Operating Instructions Manual Download Page 106 | Manualshive

Page: 106 / 122

background image

106

7. Image transmission functions

<Transmitting images to the unit>

1. Select the mode.

Check that “To HS400” appears in the [Mode] field.
If “From HS400” appears instead, click the [From HS400] button so that “To HS400” appears.

2. Select the transmission destination of the images in the [Target] field.

FMEM1: Unit’s frame memory 1

FMEM2: Unit’s frame memory 2

3. When the [Select Image] button is clicked, the file selection dialog box appears on the screen.

Select the image file to be transmitted, and click [OK].
The image is now displayed in the image display area, and its horizontal and vertical dimensions appear in
the [Width] and [Height] fields at the bottom right.

4. In the [Size] field, select the size of the image to be transmitted to the unit.

HD1080 (1920



1080), HD720 (1280



720), SD480 (720



487) or SD576 (720



576) can be selected as

the size. If the image is in a different video format from the ones supported by the unit, the output will not be
displayed properly.

5. In the [Aspect] field, select the scaling method.

If the size of the image to be transmitted and the selected image differ, the image will be automatically
scaled according to one of the following methods.

Full: The size of the image is increased or reduced so that it fits the size selected in the [Size] field. If the

aspect ratio of the image to be transmitted differs from that of the selected image, the ratio between
the horizontal and vertical dimensions will be changed.

Keep: The image is expanded or reduced while its original aspect ratio is kept unchanged.

Any empty spaces in the image will appear black.

6. The [RGBA (FMEM1&2)] button can be selected when images containing the alpha channel are to be

transmitted.

When the [RGBA (FMEM1&2)] button is clicked, the RGB images are transferred to frame memory 1
(FMEM1), and the alpha channel images are transferred to frame memory 2 (FMEM2).

When the [Display Alpha] button is clicked, the alpha channel images appear as a preview display.

7. Click the [Send] button to transmit the image to the unit.

«
...
104
105
106
107
108
...
»

Summary of Contents for AVHS400AN - MULTI-FORMAT LIVE SWITCHER



























































































































Reviews:

No comments

Related manuals for AVHS400AN - MULTI-FORMAT LIVE SWITCHER

D-PFS4226-24ET-240

Brand: Dahua Pages: 58

Brand: IBM Pages: 164

8265 Nways ATM Switch

Brand: IBM Pages: 174

Brand: Belkin Pages: 12

Brand: SMC Networks Pages: 43

Brand: Vega Pages: 28

Brand: Digitronic Pages: 24

Brand: Eaton Pages: 2

VIGILANT VTS0400

Brand: RONK Pages: 32

Brand: ATEN Pages: 26

Hi-Speed USB 2.0 Hub

Brand: Saitek Pages: 14

Brand: DELTA DORE Pages: 3

Brand: EGig Pages: 10

Tuffset 200302F

Brand: VXI Pages: 2

Brand: Lindy Pages: 2

Brand: I-Rocks Pages: 23

Brand: CAME Pages: 5

Brand: GE Pages: 26

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands