- 57 -
This function detects the horizontal tilt of the unit, and automatically corrects it to the level
position before recording.
≥
Select [EXIT] and press the button in the center or press the MENU button to complete the
settings.
≥
Icon is displayed in
A
position.
j
When the tilt is corrected:
j
When the tilt is above the correction range:
/
≥
When the tilt exceeds the correction range, move the unit
to the position where
is displayed.
≥
The range that this icon can be displayed correctly the slope is about 45
o
to the vertical direction.
≥
The image may move while zooming depending on the tilt of this unit.
≥
To record a level image with a tripod, attach this unit by using “Level Gauge” (
l
53
), and then use
Level Shot Function.
This function allows you to record color images in very low light situations. (Minimum
required illumination: approx. 1 lx)
≥
Switch to Manual Mode. (
l
38
)
≥
Select [EXIT] and press the button in the center or press the MENU button to complete the
settings.
≥
Recorded scene is seen as if frames were missed.
≥
If set in a bright place, the screen may become washed out for a while.
≥
Bright dots that are usually invisible may be seen, but this is not a malfunction.
≥
This function cannot be used when [TIME LAPSE REC] is used.
≥
Using a tripod is recommended.
≥
In darker areas, Auto Focus may focus a bit slower. This is normal.
[LEVEL SHOT]
:
When this function is set to on.
:
When this function is set to off.
: [CAMERA SETUP]
#
[LEVEL SHOT]
#
[ON]
MENU
[COLOR NIGHT REC]
: [CAMERA SETUP]
#
[COLOR NIGHT REC]
#
[ON]
MENU
