Panasonic AVCCAM AG-AC8EJ Operating Instructions Manual Download

Page: 105 / 125

- 105 -

The firmware of this device is updated. (

116

)

The accumulated operating time of this device is displayed.

Selects the sound heard through the headphones.

≥

When this unit is connected to a TV using the HDMI cable (optional), audio at the time of the
[RECORDING] setting is output even if this setting is set to [LIVE].

You can select the language on the screen display and the menu screen.

[UPDATE]

[OPERATION TIME]

[H/PHONE MODE]

[LIVE]:

The sound which has been input from the microphone is output as is.
This setting is selected when delays in the sound are annoying.

[RECORDING]:

The sound in the status which is to be recorded (the sound synchronized
with the images) is output.

[LANGUAGE]

[English]/[Français]/[Español]

Summary of Contents for AVCCAM AG-AC8EJ






























































































































Search results

Summary of Contents for AVCCAM AG-AC8EJ

Reviews:

Related manuals for AVCCAM AG-AC8EJ

Brands by name

Popular brands

Panasonic AVCCAM AG-AC8EJ, Operating Instructions Manual

Search results

Summary of Contents for AVCCAM AG-AC8EJ

Reviews:

Related manuals for AVCCAM AG-AC8EJ

Brands by name

Popular brands