Panasonic AVCCAM AG-AC8EJ Operating Instructions Manual Download

Page: 106 / 125

- 106 -

Video Setup

≥

Change the mode to

and select the play mode select icon. (

)

Playback of the first scene starts after playback of the last scene finishes when set to [ON]. (

)

If playback of a scene was stopped halfway, the playback can be resumed from where it was
stopped when set to [ON]. (

)

Scenes can be protected so that they are not deleted by mistake.

(Even if you protect some scenes, formatting the SD card will delete them.) (

)

Deletes a scene. (

)

To cancel relay information

≥

When the relay information is canceled, combining of the relayed scenes will not be possible
anymore.

: [VIDEO SETUP]

desired setting

[REPEAT PLAY]

[ON]/[OFF]

[RESUME PLAY]

[ON]/[OFF]

[SCENE PROTECT]

[DELETE]

[RELAY INFO CANCEL]

Summary of Contents for AVCCAM AG-AC8EJ






























































































































Search results

Summary of Contents for AVCCAM AG-AC8EJ

Reviews:

Related manuals for AVCCAM AG-AC8EJ

Brands by name

Popular brands

Panasonic AVCCAM AG-AC8EJ, Operating Instructions Manual

Search results

Summary of Contents for AVCCAM AG-AC8EJ

Reviews:

Related manuals for AVCCAM AG-AC8EJ

Brands by name

Popular brands