background image

– 44 –

Chapter 3 Preparation — Preparing the memory card

When the recording mode is MOV

SDXC memory cards and 64 GB microP2 cards can be used. SDHC memory cards and 32 GB microP2 cards can not be used.

Recording format

Recording rate

Recording capacity

64 GB

128 GB

UHD

400 Mbps

Approx. 20 minutes

Approx. 40 minutes

200 Mbps

Approx. 40 minutes

Approx. 1 hour 20 minutes

150 Mbps

Approx. 55 minutes

Approx. 1 hour 50 minutes

100 Mbps

Approx. 1 hour 20 minutes

Approx. 2 hours 40 minutes

FHD

200 Mbps

Approx. 40 minutes

Approx. 1 hour 20 minutes

100 Mbps

Approx. 1 hour 20 minutes

Approx. 2 hours 40 minutes

50 Mbps

Approx. 2 hours 40 minutes

Approx. 5 hours 20 minutes

@

@

NOTE

 

t

The recording time will change depending on the variable frame rate set in the variable frame rate recording or the super slow recording.

 

t

File is split approximately every three hours for the data in MOV format.
These are displayed as separate clips in the thumbnail screen. In addition, the clips recorded across two memory cards using the relay recording are 
displayed as separate clips.

 

t

The recording is stopped once when the recording time reaches ten hours, and recording is automatically resumed after few seconds. Image and 
audio during the pause will not be recorded. This includes the case of special recording, such as variable frame rate recording, super slow recording or 
relay recording.
When performing high-speed shooting with the variable frame rate recording or super slow recording, the recording time will be shorter than 10 hours 
depending on the ratio of the frame rate of the recording format and the variable frame rate.

 

t

In the interval recording, the recording is stopped once when the length of a clip reaches ten hours, and recording is automatically resumed after few 
seconds.

When the recording mode is AVCHD

SDHC memory cards, SDXC memory cards and microP2 cards can be used.

 

r

For SDHC memory card

Recording format

Recording rate

Recording capacity

4 GB

8 GB

16 GB

32 GB

PS

25 Mbps

Approx. 19 minutes

Approx. 40 minutes

Approx. 1 hour 20 

minutes

Approx. 2 hours 40 

minutes

PH

21 Mbps

Approx. 21 minutes

Approx. 46 minutes

Approx. 1 hour 30 

minutes

Approx. 3 hours

HA

17 Mbps

Approx. 30 minutes

Approx. 1 hour

Approx. 2 hours

Approx. 4 hours 10 

minutes

PM

8 Mbps

Approx. 1 hour

Approx. 2 hours

Approx. 4 hours 15 

minutes

Approx. 8 hours 30 

minutes

SA

9 Mbps

Approx. 1 hour

Approx. 2 hours

Approx. 4 hours

Approx. 8 hours

 

r

For SDXC memory card

Recording format

Recording rate

Recording capacity

64 GB

128 GB

PS

25 Mbps

Approx. 5 hours 20 minutes

Approx. 11 hours

PH

21 Mbps

Approx. 6 hours

Approx. 12 hours 30 minutes

HA

17 Mbps

Approx. 8 hours 30 minutes

Approx. 17 hours

PM

8 Mbps

Approx. 17 hours 10 minutes

Approx. 35 hours

SA

9 Mbps

Approx. 16 hours

Approx. 32 hours 15 minutes

@

@

NOTE

 

t

File is split approximately every 4 GB for the data in AVCHD format.
These are displayed as one clip in the thumbnail screen. However, the clips recorded across two memory cards using the relay recording are 
displayed as separate clips.

 

t

The recording is stopped once when the recording time reaches ten hours, and recording is automatically resumed after few seconds. Image and 
audio during the pause will not be recorded. This includes the case of special recording, such as relay recording.

 

t

Protection is automatically released on memory cards locked with AVCHD protection such as DVD recorders.

Handling the recording data

Folder structure example of a memory card

Various important information is contained in the recording data, and it is linked with the folder structure and management files as shown in the figure.
If the information is changed or deleted even partially, an error such as that the data cannot be recognized or the recording becomes impossible may 
occur.

Summary of Contents for AVC ULTRA AJ-UPX36OED



















































































































































































































Reviews: