background image

Read this first! (For AV-HS60C4P)

3

 

  indicates safety information.

CAUTION:

Naked flame sources, such as lighted candles, 

should not be placed on the apparatus.

Use the apparatus in tropical and/or moderate 

climates.

FCC NOTICE (USA)

This device complies with part 15 of the FCC Rules.

Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and (2) this device must accept any interference 

received, including interference that may cause undesired operation.

FCC Note:

This equipment has been tested and found to comply with the limits for a class A digital device, pursuant 

to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful 

interference when the equipment is operated in a commercial environment. This equipment generates, 

uses, and can radiate radio frequency energy, and if not installed and used in accordance with the 

instruction manual, may cause harmful interference to radio communications. Operation of this equipment 

in a residential area is likely to cause harmful interference in which case the user will be required to correct 

the interference at his own expense.

Warning:

To assure continued FCC emission limit compliance, the user must use only shielded interface cables 

when connecting to external units. If DVI-D port is to be used it must be connected to PC by compatible 

interface cable with two ferrite cores. Also, any unauthorized changes or modifications to this equipment 

could void the user’s authority to operate it.

NOTIFICATION (Canada)

CAN ICES-3 (A)/NMB-3(A)

IMPORTANT SAFETY INSTRUCTIONS

1)  Read these instructions.

2)  Keep these instructions.

3)  Heed all warnings.

4)  Follow all instructions.

5)  Do not use this apparatus near water.

6)  Clean only with dry cloth.

7)  Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

8)  Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that 

produce heat.

9)  Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider 

than the other. A grounding-type plug has two blades and a third grounding prong. The wide blade or the third prong are 

provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the 

obsolete outlet.

10) Protect the power cord form being walked on or pinched particularly at plugs, convenience receptacles, and the point 

where they exit from the apparatus.

11) Only use attachments/accessories specified by the manufacturer.

12) Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. 

When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.

13) Unplug this apparatus during lightning storms or when unused for long periods of time.

14) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged 

in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the 

apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

Summary of Contents for AV-HS60C4E





















Reviews: