background image

2

Read this first! (For AV-HS60C4P)

Read this first! 

(For AV-HS60C4P)

  indicates safety information.

WARNING:

Installation should only be performed by qualified 

installation personnel.

Improper installation may result in the entire 

apparatus falling down and causing injury.

CAUTION

RISK OF ELECTRIC SHOCK 

 

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, 

DO NOT REMOVE COVER (OR BACK).

NO USER SERVICEABLE PARTS INSIDE.

REFER TO SERVICING TO QUALIFIED SERVICE PERSONNEL.

The lightning flash with arrowhead symbol, 

within an equilateral triangle, is intended to 

alert the user to the presence of uninsulated 

“dangerous voltage” within the product’s 

enclosure that may be of sufficient magnitude 

to constitute a risk of electric shock to 

persons.
The exclamation point within an equilateral 

triangle is intended to alert the user to 

the presence of important operating and 

maintenance (servicing) instructions in the 

literature accompanying the appliance.

WARNING:

This equipment must be grounded.

To ensure safe operation, the three-pin plug must 

be inserted only into a standard three-pin power 

outlet which is effectively grounded through 

normal household wiring.

Extension cords used with the equipment must 

have three cores and be correctly wired to provide 

connection to the ground. Wrongly wired extension 

cords are a major cause of fatalities.

The fact that the equipment operates satisfactorily 

does not imply that the power outlet is grounded 

or that the installation is completely safe. For your 

safety, if you are in any doubt about the effective 

grounding of the power outlet, please consult a 

qualified electrician.

WARNING:

•  To reduce the risk of fire or electric shock, do not 

expose this equipment to rain or moisture.

•  To reduce the risk of fire or electric shock, keep 

this equipment away from all liquids. Use and 

store only in locations which are not exposed 

to the risk of dripping or splashing liquids, and 

do not place any liquid containers on top of the 

equipment.

WARNING:

Always keep switch blank caps (large)/(small) and 

memory cards (optional accessories) out of the 

reach of babies and small children.

WARNING:

Fuse replacement should only be performed by 

qualified personnel.

For continued protection against risk of fire, 

replace only with the same type; 3.15 AH - 250 V 

fuse for F1/F2.

CAUTION:

To reduce the risk of fire or electric shock and 

annoying interference, use the recommended 

accessories only.

CAUTION:

In order to maintain adequate ventilation, do 

not install or place this unit in a bookcase, built-

in cabinet or any other confined space. To 

prevent risk of electric shock or fire hazard due to 

overheating, ensure that curtains and any other 

materials do not obstruct the ventilation.

CAUTION:

The mains plug of the power supply cord shall 

remain readily operable.

The AC receptacle (mains socket outlet) shall 

be installed near the equipment and shall be 

easily accessible. To completely disconnect this 

equipment from the AC mains, disconnect the 

power cord plug from the AC receptacle.

CAUTION:

This apparatus can be operated at a voltage in the 

range of 100 – 240 V AC.

Voltages other than 120 V are not intended for 

U.S.A. and Canada.

Operation at a voltage other than 120 V AC may 

require the use of a different AC plug. Please 

contact either a local or foreign Panasonic 

authorized service center for assistance in 

selecting an alternate AC plug.

Summary of Contents for AV-HS60C4E





















Reviews: