Panasonic AV-HS410E Operating Instructions Manual Download Page 140

Page: 140 / 144

140

Word

Explanation

Transition

A function that switches from one image to another.
Wipe, mix and other effects are available for the images during switching.

Tri-level Sync

The sync signal used for HD formats.

Trimming

This is the function that eliminates the unnecessary parts at the top, bottom, left and/or
right of the images which are combined using the PinP function.

Up Converter

This is the function that converts material in the SD format into the HD format which
yields a high resolution.

Video Memory

This is the memory in which the images (still images and moving images) with key
signals can be stored.

Wipe

A video effect in which one image is gradually replaced by another as the boundary
between the two is moved using a preselected pattern.

Appendix (glossary)

Summary of Contents for AV-HS410E

















































































































































Search results

Summary of Contents for AV-HS410E

Reviews:

Related manuals for AV-HS410E

Brands by name

Popular brands

Panasonic AV-HS410E, Operating Instructions Manual

Search results

Summary of Contents for AV-HS410E

Reviews:

Related manuals for AV-HS410E

Brands by name

Popular brands