Panasonic AK-MSU935AP Operating Instructions Manual Download

Page: 16 / 76

PEAK2: Peak frequency 2

This is used to select one of the two contour
correction frequency bands (boost frequency or
peak frequency).
The thickness of the detail is changed.
Selection range: OFF, 1.89M, 2.18M, 2.56M,

3.17M, 4.00M, 5.28M, 6.75M

LEVEL DEP: Level dependent

This function reduces the detail in the dark parts,
and it is used to adjust the level of the detail.
Adjustment range: 0 % to 30 %

DARK DTL: Dark detail

This function boosts the detail in the dark parts.
Adjustment range: 0 to 5

CORNER: Corner detail



When the AK-HC3500A/AK-HC3500 camera
is used

This function boosts the detail around the edges
of the screen.
Adjustment range: 0 to 31



When the AK-HC3800 camera is used

This does not operate and “- - -” is displayed
because the function is not available.

SOURCE: Detail source



When the AK-HC3500A/AK-HC3500 camera
is used

This is used to select the source signals for
creating the detail components.
Selection range: G+R, G+B, 2G+B+R, 3G+R, G



When the AK-HC3800 camera is used

This does not operate and “- - -” is displayed
because the function is not available.

+ CLIP: Detail edge clip (overshoot)



When the AK-HC3500A/AK-HC3500 camera
is used

This is used to limit the length of the overshoot
parts of the detail edge components.
Adjustment range: 0 to 63



When the AK-HC3800 camera is used

This does not operate and “- - -” is displayed
because the function is not available.

– CLIP: Detail edge clip (undershoot)



When the AK-HC3500A/AK-HC3500 camera
is used

This is used to limit the length of the undershoot
parts of the detail edge components.
Adjustment range: 0 to 63



When the AK-HC3800 camera is used

This does not operate and “- - -” is displayed
because the function is not available.

DTL KNEE: Detail knee



When the AK-HC3500A/AK-HC3500 camera
is used

This is used to suppress the overshoot parts of
the detail components by applying knee.
Adjustment range: 0 to 63



When the AK-HC3800 camera is used

This does not operate and “- - -” is displayed
because the function is not available.

CRM DTL: Chroma detail

This is used to enhance the contours of the
areas with a high chroma saturation in the
subjects.
Adjustment range: 0 to 63

CRM CRSP: Chroma detail crisp



When the AK-HC3500A/AK-HC3500 camera
is used

This is used to ensure that the chroma detail is
not added to the very faint noise components
below the level set.
Adjustment range: 0 to 63



When the AK-HC3800 camera is used

This does not operate and “- - -” is displayed
because the function is not available.

CRM RED: Chroma detail reduction



When the AK-HC3500A/AK-HC3500 camera
is used

This is used to reduce the chroma detail.
Adjustment range: 0 to 63



When the AK-HC3800 camera is used

This does not operate and “- - -” is displayed
because the function is not available.

Parts and their functions

Summary of Contents for AK-MSU935AP













































































Search results

Summary of Contents for AK-MSU935AP

Reviews:

Related manuals for AK-MSU935AP

Brands by name

Popular brands

Panasonic AK-MSU935AP, Operating Instructions Manual

Search results

Summary of Contents for AK-MSU935AP

Reviews:

Related manuals for AK-MSU935AP

Brands by name

Popular brands