Panasonic AK-MSU935AP, Operating Instructions Manual

Page: 13 / 76

13
Example of screen display: MATRIX (2/2)
< MATRIX > ( 2 / 2 )
MTX 12 A SATU A PHASE A
MTX 12 B SATU B PHASE B
MTX 12 MEM
PRESET
MTX 12 A SATU A PHASE A
G 0 0
M-PED SHUTTER M-GAIN
0 100 0dB
MTX 12 A: Selection of adjusted color phase of
12-axis MTX memory A
Selection range: G, G_Cy, Cy, Cy_B, B, B_Mg,
Mg, Mg_R, R, R_Ye, Ye, Ye_G
SATU A, PHASE A: Adjustment of chroma
saturation and color phase
of 12-axis MTX memory A
These are used to adjust the saturation and color
phase of each of the color components in MTX
memory A.
Adjustment range:

When the AK-HC3500A/AK-HC3500
camera is used
–128 to 127
 When the AK-HC3800 camera is used
–63 to 63
MTX 12 B: Selection of adjusted color phase of
12-axis MTX memory B
Selection range: G, G_Cy, Cy, Cy_B, B, B_Mg,
Mg, Mg_R, R, R_Ye, Ye, Ye_G
SATU B, PHASE B: Adjustment of chroma
saturation and color phase
of 12-axis MTX memory B
These are used to adjust the saturation and color
phase of each of the color components in MTX
memory B.
Adjustment range:
 When the AK-HC3500A/AK-HC3500
camera is used
–128 to 127

When the AK-HC3800 camera is used
–63 to 63
MTX 12 MEM: Switching between 12-axis MTX
memory A and MTX memory B
Selection range: OFF, A, B
PRESET: Preset switching of MTX
Selection range: NORM, EBU, NTSC
J
HD detail control switch [HD DTL]
This switch is selected when the extent of the detail
enhancement (hard/soft) of the HDTV image output is
to be changed.
When the HDTV detail OFF switch is lighted, the
effects will not be reflected in the images and the
numerical values will remain unchanged as well.
Since the SDTV video output is created from the
HDTV video output, the adjustments made by the HD
detail controls are also reflected in the SDTV video
output.
Example of screen display: HD DETAIL (1/2)
< HD DETAIL > ( 1 / 2 )
V DTL H DTL CRISP PEAK FREQ
LEVEL DEP DARK DTL
CORNER SOURCE + CLIP — CLIP
DTL +KNEE DTL —KNEE
KDTL KDTL CRSP KDTL FREQ
V DTL H DTL CRISP PEAK FREQ
22 22 3 17.3
M-PED SHUTTER M-GAIN
0 100 0dB
V DTL: Vertical detail level
This is used to adjust the amount of vertical
detail.
Adjustment range: 0 to 63
H DTL: Horizontal detail level
This is used to adjust the amount of horizontal
detail.
Adjustment range: 0 to 63
CRISP: Crisp
This is used to set the maximum amplitude of the
very faint noise components which are removed
from the detail components.
Adjustment range: 0 to 63
PEAK FREQ: Peak frequency
This is used to select the contour correction
frequency band (boost frequency or peak
frequency). The thickness of the detail is
changed.
Selection range: 12.4, 12.5, 12.7, 12.9, 13.0,
13.3, 13.6, 13.9, 14.2, 14.6,
15.0, 15.5, 16.1, 16.7, 17.3,
18.0, 18.6, 18.8, 19.0, 19.2,
19.5, 19.9, 20.3, 20.9, 21.5,
22.4, 23.6, 25.4, 28.6, 37.1
LEVEL DEP: Level dependent
This function reduces the detail in the dark parts,
and it is used to adjust the level of the detail.
Adjustment range: 0 % to 30 %
Parts and their functions