Panasonic AK-MSU935AP, Operating Instructions Manual

Page: 18 / 76

18
RET1 SEL: Return1 video settings
RET2 SEL: Return2 video settings
RET3 SEL: Return3 video settings
RET4 SEL: Return4 video settings
These are used to set the input allocations of the
return signals.
Selection range:

When the AK-HC3500A/AK-HC3500
camera is used
HDS1, HDS2, HDS3, HDS4, SDS1, SDS2,
SDS3, SDS4

When the AK-HC3800 camera is used
HDS1, HDS2, SDS1, SDS2, VBS1
RET.DELAY(HD): RET display appearance time
setting
This makes it possible to select either 1 frame
delay (NORM) or the shortest delay (SHORT) for
the RET display images.
Selection range: NORM, SHORT
D/C MODE: Down-conversion system selection
This is used to select the down-conversion
system of the images which are output from SD
SDI and VBS.
In the case of the AK-HC3500A or AK-HC3500
camera, operation is performed in accordance
with the external control signals input to AUX of
the CCU if LINK is selected.
Selection range:

When the AK-HC3500A/AK-HC3500
camera is used
SP, SQ, LB, LINK
 When the AK-HC3800 camera is used
SC, SQ, LB
U/C MODE: Up-conversion system selection
This is used to select the up-conversion system
of the images which is applied to the SD SDI and
VBS return images.
In the case of the AK-HC3500A or AK-HC3500
camera, operation is performed in accordance
with the external control signals input to AUX of
the CCU if LINK is selected.
Selection range:

When the AK-HC3500A/AK-HC3500
camera is used
SP, SQ, LB, LINK
 When the AK-HC3800 camera is used
SC, SQ, LB
RATIO: Setting of standard lens shrinker

When the AK-HC3500A/AK-HC3500 camera
is used
This is used to set the shrinker of the standard
lens.
When LINK is selected, operation is performed
in accordance with the external control signals
which are input to AUX of the CCU.
Selection range: 0.8, 1.0, LINK

When the AK-HC3800 camera is used
This does not operate and “- - -” is displayed
because the function is not available.
VFMD: Setting of viewfinder’s angle of view
 When the AK-HC3500A/AK-HC3500 camera
is used
This is used to set the angle of view of the
camera viewfinder.
When LINK is selected, operation is performed
in accordance with the external control signals
which are input to AUX of the CCU.
Selection range: 4:3, 16:9, LINK

When the AK-HC3800 camera is used
This does not operate and “- - -” is displayed
because the function is not available.
HD BAR: HD color bar mode setting
This is used to select the mode of the HD color
bars which are output from the HD connectors
of the CCU when the BAR switch has been
pressed.
Selection range:

When the AK-HC3500A/AK-HC3500
camera is used
STD, SMPTE, ARIB, EIAJ, SPLIT
 When the AK-HC3800 camera is used
FULL, BARS-1, ARIB, BARS-2, BARS-3,
BARS-4, BARS-5, BARS-6
SD BAR: SD color bar mode setting

When the AK-HC3500A/AK-HC3500 camera
is used
This is used to select the mode of the SD color
bars which are output from the SD connectors
of the CCU when the BAR switch has been
pressed.
Selection range: SMPTE, EIAJ, SPLIT

When the AK-HC3800 camera is used
This does not operate and “- - -” is displayed
because the function is not available.
PATHO: Pathological pattern output
This is used to forcibly switch the images output
from the HD connectors of the CCU to the
pathological pattern.
Selection range: OFF, ON
SET UP: Color bar setup setting
This is used to set the setup of the color bars
which are output from the VBS connectors of the
CCU. (0 % or 7.5 %)
Selection range: 0 %, 7.5 % (59.94 Hz)
- - - (50 Hz)
Parts and their functions