Updating the camera firmware
43
r
Executing black shading
[BSHD NG]
Attach a lens cap and confirm that light has been properly shut out.
Other warning displays
The IPU <ALARM> lamp lights red while the warnings are being displayed.
Excluding the [CABLE OPEN] warning, the front tally lamp and back tally lamp of the camera both blink red
when there is a warning.
[FAN NG]
There is a problem in the fan.
[HIGH TEMPERATURE]
The internal temperature is high.
[LOW VOLTAGE]
The voltage of the external DC power supply is low.
[SHUTDOWN SOON]
The internal temperature is rising more than expected. Or, the voltage of the
external DC power supply has lowered beyond the operation guarantee.
The power is turned off forcefully in 30 seconds.
[CABLE OPEN]
An optical fiber cable has not been connected, or the camera is not being supplied
with power.
Updating the camera firmware
Refer to the following website for new updates of the firmware and for operating instructions.
https://pro-av.panasonic.net/
Specifications
For details on specifications, visit the Panasonic website (https://pro-av.panasonic.net/manual/en/index.
html) and refer to the Operating Guide (PDF).
General
Power
DC 12 V
Power consumption
33 W
indicates safety information.
Ambient operating temperature
−
10 °C to 45 °C (14 °F to 113 °F)
(Preheating required under a temperature 0 °C (32 °F) or below)
Storage temperature
−
20 °C to 60 °C (
−
4 °F to 140 °F)
Ambient operating humidity
85% or less (relative humidity)
Weight
Approx. 4.0 k
]
(8.8 lbs.) (body only)
Dimensions (W
×
H
×
D)
Body only
180 mm
×
190 mm
×
177 mm
(7-3/32 inches
×
7-15/32 inches
×
6-31/32 inches)
(excluding protrusions)
Operating Instructions
/ Specifications
Warning displays/
