background image

Lire ces informations en premier !

 

FRANÇAIS

19

Lire ces informations en premier !

  Informations concernant la sécurité.

AVERTISSEMENT:

 

f

Pour réduire les risques d’incendie ou 

de choc électrique, évitez d’exposer cet 

appareil à la pluie ou à l’humidité.

 

f

Pour réduire tout risque de feu ou de choc 

électrique, éloigner l’appareil des liquides 

— utiliser et ranger uniquement dans un 

endroitne risquant pas de recevoir des 

gouttes ou d’être aspergé de liquides, et 

ne pas mettre de récipient renfermant des 

liquides sur le dessus de l’appareil.

AVERTISSEMENT:

Toujours tenir le câble anti-chute (accessoire 

en option) ou les accessoires (écrou à 

embase, vis de montage pour câble) hors de 

portée des bébés et jeunes enfants.

AVERTISSEMENT:

Cet équipement est conforme à la Classe 

A de la norme CISPR 32. Dans un 

environnement résidentiel, cet équipement 

peut produire des interférences radio.

ATTENTION:

Pour éviter tout risque d’incendie, de chocs 

électriques ou d’interférences, n’utiliser que 

les accessoires recommandés.

ATTENTION:

Ne pas dévisser le couvercle.

Pour réduire tout risque d’électrocution, 

ne pas retirer le couvercle. Il ne se trouve 

à l’intérieur aucune pièce qui puisse être 

réparée par l’utilisateur.

Confier toute réparation à un personnel qualifié.

ATTENTION:

Pour maintenir une bonne ventilation, ne pas 

installer ni placer l’appareil dans une étagère, 

un meuble encastré ni aucun endroit confiné.

Pour éviter tout risque de choc électrique 

ou de feu dû à une surchauffe, vérifier 

qu’aucun rideau ni aucun autre matériau ne 

fait obstacle à la ventilation.

ATTENTION:

Vérifiez l’installation au moins une fois par an.

Une mauvaise installation peut provoquer la 

chute de l’appareil et engendrer des blessures.

ATTENTION:

Ne pas soulever et déplacer l’appareil quand 

le trépied est en place.

L’attache risque de se casser sous le poids du 

trépied, ce qui peut entraîner des blessures.

ATTENTION:

Ne laissez pas l’appareil au contact direct de 

la peau de façon prolongée lors de l’utilisation.

Des brûlures dues aux basses températures 

pourraient résulter si les parties de cet 

appareil sont en contact direct avec la peau 

de façon prolongée.

Quand vous utilisez l’appareil de façon 

prolongée, utilisez le trépied.

ATTENTION:

Ne pas placer de sources de flammes nues, 

telles que des bougies allumées, sur l’appareil.

ATTENTION:

Des radiations laser invisibles sont émises 

par le connecteur de fibre optique quand ce 

produit est sous tension.

Ne pas regarder directement dans le 

connecteur de fibre optique de ce produit.

ATTENTION:

Ce produit utilise un système de laser 

semiconducteur. Il s’agit d’un produit laser 

de classe 1.

L’utilisation de commandes, les réglages 

et l’exécution de procédures autres que 

celles spécifiées dans ce manuel peuvent 

entraîner une exposition à des radiations 

dangereuses.

N’effectuez aucune modification.

Ne réparez pas l’appareil vous-même.

Adressez-vous à du personnel qualifié pour 

l’entretien.

NOTIFICATION (Canada)

CAN ICES-3 (A)/NMB-3(A)

Operating Instructions

Summary of Contents for AK-HPR1000













































Reviews: