Panasonic AK-HC5000, Operating Instructions Manual

Page: 30 / 109

– 30 –
Chapter 3 Preparation — On-screen displays of the viewfinder
On-screen displays of the viewfinder
Studio Handy Camera settings and messages indicating operating statuses appear on the viewfinder screen.
All items that can be displayed are located as follows.
59.94p 1080/59.94p FAN OFF MENU RET1 NAM H.SENS.
1 A 15000K 1/2000 36dB +1.8dB FBC DRS CAC D.EX EX2.0 F5.6 Z99 99 ++
14.6V WRN
A
ROLL
+4.1
PITCH
-1.5
C
A
M
C
H
1
C
C
U
C
H
2
1 2 3 4 5 6 7 8
13 12
10 9
14 15 19
29
30
31
18 20 21 23 26 25 24 22 17 16
11
27
28
1 Camera mode display
Indicates the camera image mode.
f
[59.94p]
f
[50p]
f
[29.97p]
f
[23.98p]
f
[25p]
2 System mode display
Indicates the system frequency.
f
[1080/59.94p]
f
[1080/50p]
f
[1080/29.97p]
f
[1080/25p]
f
[1080/23.98p]
f
[1080/59.94p-240fps]
f
[1080/50p-200fps]
3 Warning display (preheating)
Displayed when the device is being preheated at startup due to low temperature inside the device.
4 Warning display (device)
Displayed when there is an abnormality with the condition of the device.
f
The fan stops abnormally.
f
Internal temperature becomes high.
f
DC output supply goes over. (Combined total of each output)
f
There is a problem with the light reception level.
The display cannot be hidden.
5 Warning display (fan stopped)
Displayed when the fan is stopped.
[MAIN MENU]
→ [MAINTENANCE] → [FAN SETTING] → [FAN] → [FAN MODE] → [OFF] is set.
6 Warning display (menu display)
Displays the camera menu in the CCU. The menu cannot be operated from the camera.
7 Return ID display
Displays the return ID of the current return output number.
The ID (character string) set in [MAIN MENU]
→ [RETURN SETTING] → [RETURN1 ID] to [RETURN4 ID] is displayed.
The following return IDs (character strings) are set in factory settings.
f
[RET1] (When [RETURN1] is output)
f
[RET2] (When [RETURN2] is output)
f
[RET3] (When [RETURN3] is output)
f
[RET4] (When [RETURN4] is output)
8 Monitor output signal display
Indicates the signal type that is output to the monitor screen.
Configures the signal settings from [MAIN MENU]
→ [IN/OUT SELECT] → [VF OUT].
f
[R]
f
[G]
f
[B]