Panasonic AK-HC5000 Operating Instructions Manual Download

Page: 13 / 109

– 13 –

Chapter 1 Overview — Using the camera in a system

Using the camera in a system

An example of a standard system consisting of the Studio Handy Camera (AK-HC5000G/AK-HC5000GS) and peripheral devices is as follows.
For details on the connected devices, refer to the Operating Instructions of each device.

Basic configuration devices

The basic system configuration includes the lens, Studio Handy Camera, viewfinder, Camera Control Unit (CCU), and Remote Operation Panel (ROP).

Part name

Part No.

Remark

2-inch HD viewfinder

AJ-HVF21KG

This is the viewfinder for Studio Handy Camera.

3.45-inch color viewfinder

AG-CVF10G

AG-CVF15G

—

9-inch LCD viewfinder

AK-HVF100G

This is the LCD viewfinder for Studio Handy

Camera.

Lens

FUJINON/CANON

—

Camera Control Unit (CCU)

AK-UCU500P/AK-UCU500PS/AK-UCU500E/

AK-UCU500ES

This is the camera control unit for Studio Handy

Camera.

It is connected to Studio Handy Camera using an

optical fiber multi cable.

Do not connect anything other than AK-UCU500P/

AK-UCU500PS/AK-UCU500E/AK-UCU500ES.

Remote Operation Panel (ROP)

AK-HRP1000G

AK-HRP1005G

This is connected to the CCU using the ROP cable

to remotely control the camera, CCU, and lens.

Expanded configuration devices

The following devices can also be used in addition to the basic configuration devices.

Part name

Part No.

Remark

Microphone kit

AJ-MC700P

AG-MC200G

“Connecting a microphone” (page 33)

Microphone holder

AJ-MH800G

“Connecting a microphone” (page 33)

SD memory card*

Visit the support desk on the website*

“SD memory card slot” (page 20)

Master setup unit

AK-MSU1000GJ

Scheduled for sales in near future.

The master setup unit is not necessary if multiple

cameras are not to be controlled.

Build-up Unit

AK-HBU500G

This allows to mount large lens to the Studio Handy

Camera, allowing an equivalent operation as the

large camera.

Do not connect anything other than AK-HBU500G.

Tripod adaptor

SHAN-TM700

“Tripod mount” (page 18)

* Visit the support desk available on the following website for the latest information on SD memory cards not included in the Operating Instructions.

http://pro-av.panasonic.net/

Summary of Contents for AK-HC5000














































































































Search results

Summary of Contents for AK-HC5000

Reviews:

Related manuals for AK-HC5000

Brands by name

Popular brands

Panasonic AK-HC5000, Operating Instructions Manual

Search results

Summary of Contents for AK-HC5000

Reviews:

Related manuals for AK-HC5000

Brands by name

Popular brands