– 18 –
Chapter 2 Description of Parts — Front side
Front side
2
1
4
3
5
7
6
8
9
10
1
Lens cable/microphone cable clamp
Used for securing the lens and microphone cables.
2
Lens mount (Bayonet type)
This is where the lens is mounted.
3
<SHUTTER> switch
This is the electronic shutter switch.
<OFF>:
Disables the electronic shutter.
<ON>:
Enables the electronic shutter.
<SEL>:
Switches the shutter speed within the preset range.
This switch cannot be used when the CCU or ROP is connected to the camera.
4 <MIC> terminal (front)
Used to connect the microphone (optional).
When using, set the switch on the rear side as follows.
f
<LINE/MIC/
+
48V> selector switch (<MIC 1>): <MIC> or <
+
48V> (when using a phantom microphone)
f
<FRONT>/<REAR> switch (<MIC 1>): <FRONT>
5
<USER 1> button
A user-selected function can be assigned to this button. Pressing the button performs the assigned function.
6
Tripod mount
Used to attach the tripod adaptor SHAN-TM700 (optional) when mounting the camera on a tripod.
7 <INCOM LEVEL> dial (front)
Used to adjust the volume level of the intercom according to the settings of <REAR>/<INC1 FRONT>/<INC2 FRONT> on the rear side.
f
<REAR>:
Cannot adjust the volume level.
f
<INC1 FRONT>:
Adjusts the volume level of the intercom 1.
f
<INC2 FRONT>:
Adjusts the volume level of the intercom 2.
8
Lens lever
After the lens is mounted on the lens mount, this lever can be tightened to secure the lens.
9 <AUTO W/B BAL> switch
<AWB>:
Automatically adjusts the white balance. When the white balance is automatically adjusted with the <WHITE BAL> switch on the side of the
camera set to the <A> or <B> position, the white balance is adjusted in several seconds and the adjusted value is stored in the memory.
<ABB>:
Automatically adjusts the black balance.
The operation performed when the CCU or ROP is connected to the camera can be set from [MAIN MENU]
→
[SWITCH MODE]
→
[W/B BAL
SETTING].
10
<SELECT> dial button
Turning the <SELECT> dial button while the menu screen is displayed moves the cursor to a setting item. The menu setting can be confirmed by
pressing the <SELECT> dial button.
For details on operations, refer to “Menu operations” (page 38).
