Setup (setting) menus
controller.
0: 20 25H
USER menu
<OPERATION>
(continued)
Item
Setting
No.
Superimposed
No.
Superimposed
Description
display
display
1 1 2
AUTO REW
0000
OFF
This selects whether to rewind the tape automatically to the
0001
ON
tape start when the tape end is detected.
0: The tape stops at the tape end.
1: The tape is rewound to the tape start.
113
MEMORY
0000
OFF
This selects whether the VTR is to stop automatically when
STOP
0001
ON
the counter value reaches “0” during a fast forwarding or
rewinding operation in the CTL mode.
0: The VTR does not stop.
1 : The VTR stops automatically.
<Notes>
1. The stop mode concerned is either the stop or the still-
picture (SHTL STILL) mode depending on the setup menu
No. 313 (AFTER CUE-UP) setting.
2. When both the AUTO REW function and MEMORY
function have been selected at the same time, the AUTO
REW function takes precedence.
The underline on the setting item denotes the initial setting.
USER menu
<INTERFACE>
Item
Setting
No.
Superimposed
No.
Superimposed
Description
display
display
201
9P SEL
0000
OFF
This selects whether the 9P connector functions when the
0001
ON
REMOTE/LOCAL switch has been set to REMOTE.
0: Do not function
1: Function
This selects the ID information which is returned to the
1: DVCPRO’s, own ID is returned (F0 33H).
The underline on the setting item denotes the initial setting.
202
ID SEL
0000
OTHER
0001
DVCPRO
– 3 0 –
