USER menu
<OPERATION>
(continued)
Item
Setting
No.
Superimposed
No.
Superimposed
Description
display
display
102
FF. REW
0000
X 32
This sets the maximum speed for FF and REW operations.
MAX
0001
X 60
0: 32× normal speed
0002
X 100
1: 60× normal speed
2: 100× normal speed
<Note>
During DV format, the maximum speed is 32× normal speed
regardless of this setting.
103 AUDIO
0000
MUTE
0001
1 0 4 R E F
ALARM
106 PLAY
DELAY
0000
0001
0000
0015
OFF
This sets the status until the audio signal is output when
ON
operation switches from the stop or search modes to the play
mode.
0: The time until the audio is output is shortened.
1: The audio is output after the status stabilizes.
<Note>
When set to 0 (OFF), the sound in the initially output part is
incomplete. Therefore, this setting is not recommended for
broadcasts.
OFF
This selects whether to warn the operator when the
ON
REF.VIDEO signal has not been connected.
0: Warning is not given.
1:
Warning is given by the flashing STOP lamp.
0
This sets the play delay time in frame increments.
15
107 CAP. LOCK
0000
2F
This selects the capstan lock mode.
0001
4 F
0: 2F mode
1: 4F mode
108 FORMAT
0000
DVCPRO
This selects the format which applies when the general
SEL
0001
DV
purpose cassette is used. After selection, this status becomes
effective only when the cassette is inserted after ejection.
0: DVCPRO mode
1: DV mode
<Notes>
109
EJECT EE
SEL
0000
0001
Take care not to insert a tape whose format is the reverse of
the one selected since the following trouble as well as playback
trouble will occur.
1. A recording operation is initiated if a DV cassette is inserted
when the DVCPRO mode is selected.
No guarantees can be made for performance, etc.
Conversely, no recording can be conducted if a DVCPRO
cassette is inserted when the DV mode is selected.
2. The REMAIN display loses its accuracy.
3. The accuracy of the slowdown position near the start and
end of the tape is lost.
EE
This selects whether EE mode or BLACK is to be used during
BLACK
EJECT status
0: EE mode
1: Video blackens, audio mutes.
110
F/R EE SEL
0000
EE
This selects whether EE mode or playback mode is to be
0001
TAPE
used during FF/REW operations.
0: EE mode
1: Playback mode
111 STOP EE
0000
EE
This selects whether EE mode or playback mode is to be
SEL
0001
TAPE
used during stop mode.
0: EE mode
1: Playback mode
<Note>
The STAND-BY OFF mode complies with the above selection.
When TAPE is selected, however, the video becomes grey.
The underline on the setting item denotes the initial setting.
– 2 9 –
