Panasonic AJ-PD500E Operating Instructions Manual Download Page 91

Page: 91 / 126

Setup Menu: Menu List

Setup Menu

For details, refer to “Setting the Year, Month, Day, and Time” (

➝

page 21).

_ is the factory default setting.

I/F SETUP

CLOCK

BASIC

Item

Settings and brief function description

FREQ indications

ID OF 9P REMOTE

Sets the ID information to return to the controller.

DVCPRO:

DVCPRO

ORIGINAL:

Original ID

OTHER:

Other

Note:

Set VTR ID information other than DVCPRO for “OTHER.”

LOCAL ENABLE

Restricts the front operation panel buttons that can be operated when REMOTE is set to ON.

ENABLE:

All buttons are available.

STOP:

Only the [STOP]

button is available.

DISABLE:

No buttons are available.

AFTER CUEUP

Selects the mode for the unit after the cue-up operation is performed.

STOP:

STOP mode

SHTL +0.0:

Still image (SHTL +0.0) mode

VAR +0.0:

Still image (VAR +0.0) mode

REF ALARM

Selects whether to indicate a warning when the reference video signal set in “OUTPUT REF”
(

➝

page 106) is not input.

ON:

The lamp of the [STOP]

button flashes to indicate a warning.

OFF:

Does not indicate a warning.

BEEP

Turns the BEEP sound on or off.

ON:

Outputs a beep sound.

OFF:

Does not output a beep sound.

Note:

A beep sound is also output from the ANALOG AUDIO MON output connectors.

KEYBOARD

Sets the type of keyboard to be connected.

QWERTY(101)
QWERTY(109)
AZERTY
QWERTZ

POWER ON GUI

Sets whether to display the thumbnail screen at power-on.

THUMBNAIL:

Displays the thumbnail screen.

OFF:

Does not display the thumbnail screen.

AUTO POWER

OFF

Sets the button operation inactivity period after which to turn off the power automatically.

10min:

Turns off the power after 10 minutes of inactivity.

30min:

Turns off the power after 30 minutes of inactivity.

60min:

Turns off the power after 60 minutes of inactivity.

90min:

Turns off the power after 90 minutes of inactivity.

OFF:

Does not turn off the power of the unit and maintains the energized state.

Note:

• Even when this setting is other than OFF, the power is not turned off during playback

(including variable speed playback, fast forward/fast rewind, and pause) and record-
ing.

• When the unit is connected to an external device with a USB cable and is in the com-

municating state, the power is not turned off even if the above button activity does not
occur.

59.94Hz

50Hz

59.94Hz

50Hz

59.94Hz

50Hz

59.94Hz

50Hz

59.94Hz

50Hz

59.94Hz

50Hz

59.94Hz

50Hz

59.94Hz

50Hz

Summary of Contents for AJ-PD500E































































































































Search results

Summary of Contents for AJ-PD500E

Reviews:

Related manuals for AJ-PD500E

Brands by name

Popular brands

Panasonic AJ-PD500E, Operating Instructions Manual

Search results

Summary of Contents for AJ-PD500E

Reviews:

Related manuals for AJ-PD500E

Brands by name

Popular brands