Panasonic AJ-P2C008HG Manual Download Page 85

Page: 85 / 102

122

Setup: Item Settings

677

LCD ASPECT

0000

0001

0002

0003

AUTO

4:3

16:9

15:9

Specifies the aspect ratio of image displayed on the LCD panel.

0: Switches aspect ratio automatically.

1: Displays 480i or 576i images in the 4:3 aspect ratio.

(Displays 1080i or 720p video in the 16:9 aspect ratio.)

2: Displays images in the 16:9 aspect ratio.

3: Displays images in the 15:9 aspect ratio.

NOTE:

Since the LCD monitor on this unit has an aspect ratio of 15:9, a black border may appear

above and below the picture in AUTO or 16:9 mode.

680

CC (F1) BLANK

0000

0001

BLANK

THRU

Turns on and off closed caption signals in the first field output from the SD SDI and analog

composite output.

0: Signals are forcibly blanked.

1: Signals are not blanked.

NOTE:

• This menu is not displayed when 50 is selected in menu No. 25 SYSTEM FREQ.

• In EE mode, the closed captions are output with the VITC signal.

681

CC (F2) BLANK

0000

0001

BLANK

THRU

Turns on and off closed caption signals in the second field output from the SD SDI and

analog composite output during playback.

0: Signals are forcibly blanked.

1: Signals are not blanked.

NOTE:

• This menu is not displayed when 50 is selected in menu No. 25 SYSTEM FREQ.

• In EE mode, the closed captions are output with the VITC signal.

684

EDH(SD)

0000

0001

OFF

Specifies whether or not EDH is superimposed on serial output signals.

0: Signals are not superimposed.

1: Signals are superimposed.

685

ESR MODE(SD)

0000

0001

OFF

AUTO

Specifies the operating mode for edge subcarrier reduction (ESR) in the playback circuit.

0: ESR is forcibly set to off.

1: ESR is automatically turned on and off depending on operating mode.

NOTE:

• This menu is not displayed when 50 is selected in menu No. 25 SYSTEM FREQ.

688

CC REC

0000

0001

OFF

Specifies whether or not the closed caption signal that is superimposed on the SD SDI and

analog composite input signals will be recorded.

0: Not recorded.

The EE output is also blanked.

1: A closed caption signal that is superimposed on an input signal is recorded.

NOTE:

• This menu is not displayed when 50 is selected in menu No. 25 SYSTEM FREQ.

• When 1394 is selected as the input signal, the closed caption signal superimposed on

the compressed input signal is recorded in its original form regardless of settings in this

menu.

689

COMP MODE

0000

0001

NORMAL

DARK

Selects the compression method used during video recording.

0: Records using normal compression processing.

1: Records video suppressing compression video distortion that is generated by dark

areas that are about 10 IRE (70 mV) or less.

NOTE:

This setting is available in DVCPRO HD 720p mode recording.

690

UMID REC

0000

0001

OFF

Specifies whether or not UMID data should be recorded.

0: UMID data is not recorded.

1: Recorded.

691

UMID GEN

0000

0001

INT

EXT

Specifies the generation method of UMID information that is recorded when menu No. 690

UMID REC is set to on.

0: Newly created UMID information is always recorded.

1: Records UMID data superimposed on the input signal.

Newly created UMID information is recorded when not superimposed on an input signal.

Item

Setting

Settings and brief function description

No.

SUPER

DISP.

No.

SUPER

DISP.

Summary of Contents for AJ-P2C008HG







































































































Search results

Summary of Contents for AJ-P2C008HG

Reviews:

Related manuals for AJ-P2C008HG

Brands by name

Popular brands

Panasonic AJ-P2C008HG, Manual

Search results

Summary of Contents for AJ-P2C008HG

Reviews:

Related manuals for AJ-P2C008HG

Brands by name

Popular brands