Panasonic AJ-LT95, Operating Instructions Manual

Page: 32 / 188

[
[ [
The underlining indicates the factory setting.
001 LOCAL ENA
0000
0001 DIS
ST&EJ
This selects the switches which can be operated on the control
panel when the CONTROL switch has been set to the REMOTE
position.
0: None of the switches or buttons can be operated.
1: Only the STOP (ALL STOP) and EJECT buttons can be
operated.
003 REMAIN SEL
0000
0001 OFF
ON
This selects whether the REMAIN (remaining tape time) display is
to be superimposed on the MONITOR OUT connectors and liquid
crystal monitor screen.
0: REMAIN display is not shown.
1: REMAIN display is shown.
<Notes>
O
REMAIN display is not shown when the tape has been ejected
or when the remaining tape time is calculated after the tape has
been inserted.
O
It is not shown when TIME has been selected as the setup
menu item No.008 (DISPLAY SEL) setting.
O
It is not shown when tape start or tape end is detected and BOT
or EOT is displayed.
002 TAPE TIMER
0000
0001 ±12h
24h
This selects the time system displayed on the CTL counter.
0: The time is displayed using the 12-hour time system.
1: The time is displayed using the 24-hour time system.
008 DISPLAY SEL
0000
0001
0002 TIME
T&STA
T&S&M
This selects what display is to be superimposed on the MONITOR
OUT connectors and liquid crystal monitor screen.
0: Counter value is displayed.
1: Counter value and operation mode are displayed.
2: In addition to the counter value and operation mode, the
remaining tape, tape format and error messages are displayed.
013 PB FORMAT
0000
0001
MANUAL
AUTO
This selects the format used for tape playback.
0: The format corresponds to what is selected as the setup menu
item No.012 (SYS FORMAT) setting.
1: The format corresponds to the format of the recording on the
tape.
<Notes>
O
Internal operation for VTR2 is forcibly set to MANUAL when an
editing mode has been selected.
O
The automatic 525i/625i setting is not performed.
[ [
[ [
070 TV SYSTEM
0000
0001 525
625
This selects the TV system.
0: The 525 interlace/59.94 Hz system is selected.
1: The 625 interlace/50 Hz system is selected.
<Note>
When this setting is changed, it is stored in the memory, and it
takes effect when the power is turned off and back on again.
[
011 CHARA TYPE
0000
0001 WHITE
W/OUT
This selects the type of characters to be used for the
superimposed display on the VIDEO MONI OUT connector and
for the setup menus.
0: White characters on a solid black background
1: White characters with black borders
[
[ [
[ [
012 SYS FORMAT
0000
0001 50M
25M
This selects the recording and playback format.
0: DVCPRO50 (50 Mbps) is selected.
1: DVCPRO25 (25 Mbps) is selected.
[ [
Item Setting
No.
Superimposed
display
No.
Superimposed
display
Description of setting
V
T
R
1
V
T
R
2
32
Setup menus
BASIC menu