152
AVCHD Recording and Playback: Using an Optional AVCHD Board
◆
NOTE:
• For the latest information not available in the Operating Instructions,
visit the Support Desk at the following Web site.
For English: http://pro-av.panasonic.net/
• This unit supports SD memory cards formatted using the FAT12 and
FAT 16 format compatible with the SD standard and SDHC memory
cards formatted using the FAT 32 format.
• This unit supports 4 GB or larger memory cards only if they are
SDHC memory cards.
Cards that are 4 GB or larger without an SDHC logo do not conform
to the SD standard.
• Format SD memory cards on this unit. SD memory cards formatted
on a computer or other device may delay start of recording or may
not be used in this unit.
➝
Refer to “Formatting SD Memory Cards” (page 74).
• MultiMediaCards cannot be used.
Clips recorded on SD memory cards inserted in the SD/SDHC
memory card slot on the AJ-HPM200 can be played back as
thumbnails and video clips corded on P2 cards.
■
Access lamps
Set the write-protect switch to [LOCK] to prevent accidental
deletion of data recorded on an SD card.
Use the thumbnail menu to format SD memory cards.
➝
Refer to “Using SD/SDHC Memory Cards” (page 74).
You can also use the menu in the AVCHD mode for formatting
SD memory cards.
➝
For how to switch to the AVCHD mode, refer to “Switching
to AVCHD mode” (page 155).
1
Switch to the AVCHD mode and press the MENU
button.
2
Select [CARD FUNCTIONS] – [CARD FORMAT] and
press the SET button.
Select [YES] in the screen shown below that appears. To
cancel formatting, select [NO].
3
Select [YES] in the confirmation dialog.
The SD memory card will now be formatted.
4
Press the MENU button to end processing.
• Check that no important data remains on a card before
formatting since data erased by formatting cannot be
recovered.
1
Check that the SD memory card access lamp is not
flashing.
2
Press the center of the SD memory card and remove
it after it bounces back by pulling it outwards.
SD memory card slots and access lamps
Steady orange light:
Card is available for reading and
writing.
Flashing orange light
(fast):
Recognition phase to determine
whether the card is defective or not
Flashing orange light
(slow):
Card is being accessed.
Off:
Card is not available for reading and
writing.
No card is inserted, the card has not
been formatted or a non-compatible
card has been inserted.
Write protect status, no free space
left on card
SD memory card protection
LOCK
Write-protect switch
Formatting SD memory cards
Removing SD memory cards
