Panasonic AJ-HD3700B Operating Instructions Manual Download

Page: 45 / 58

– 45 –

Connector signals

∑

PARALLEL I/O (50P) connector

(1) PULSE SIGNAL: The signal fall is detected and the signal becomes active.

Pin no.

Signal

REC COMMAND

PLAY COMMAND

FF COMMAND

REW COMMAND

STOP COMMAND

STBY ON
COMMAND

STBY OFF
COMMAND

RS-422 REMOTE
ON COMMAND

RS-422 REMOTE
OFF COMMAND

LOCAL ENABLE
COMMAND

EJECT COMMAND

ENTRY
COMMAND

ALL_REC_INH_
ON COMMAND

PRE_CTL_INH_
ON COMMAND

LOCAL DISABLE
COMMAND

Direction

INPUT

Type

PULSE SIGNAL

Description

When this signal becomes active simultaneously with the
play command, it transfers the VTR to the REC PLAY
mode. However, the VTR is not transferred to the REC
mode if the insert or assemble mode has been set.

This transfers the VTR to the PLAY mode.

This transfers the VTR to the FF mode.

This transfers the VTR to the REW mode.

This transfers the VTR to the STOP mode.

When the VTR is in the loosing or STBY OFF mode, it is
set to the STNBY ON mode as soon as it receives this
command.

When the VTR is in the loosing or STBY ON mode, it is
set to the STNBY OFF mode as soon as it receives this
command.

This enables RS-422 control. However, the VTR must be
in the REMOTE mode for this command to take effect.

This disables RS-422 control.

This enables the REMOTE OP MAP functions. When the
MAP MODE is set to ALL, it also enables EJECT.

This transfers the VTR to the EJECT mode.

When this signal has become active, the VTR’s current
time (TC, CTL) is entered on the following menus:
When the VTR has opened the HOME menu:

≥

The time is entered in CUE TIME on the HOME menu.

When the VTR has opened the AUTO EDIT menu:

≥

The time is entered in CUE TIME on the HOME menu.

≥

The time is entered at the IN point on the AUTO EDIT
menu.

When the VTR has opened the EXTEND MULTI CUE
menu:

≥

The time is entered at the cursor position of the EXTEND
MULTI CUE menu.

When the VTR has opened the MULTI CUE menu:

≥

The time is not entered on any of the menus.

When the VTR has opened a menu other than the ones
above:

≥

The time is entered in CUE TIME on the HOME menu.

This selects ALL as the REC INH menu setting.

This selects PRE_CTL as the REC INH menu setting.

This disables the REMOTE OP MAP functions.
When the MAP MODE is set to ALL, it also disables
EJECT.

Summary of Contents for AJ-HD3700B



























































Search results

Summary of Contents for AJ-HD3700B

Reviews:

Related manuals for AJ-HD3700B

Brands by name

Popular brands

Panasonic AJ-HD3700B, Operating Instructions Manual

Search results

Summary of Contents for AJ-HD3700B

Reviews:

Related manuals for AJ-HD3700B

Brands by name

Popular brands