Panasonic AJ-D455P, Service Manual

Page: 172 / 743

INF-47
6. When the settings on the “ Setup Panel ” is completed, click “ Ok(O) ”. The “ Main Panel ” will be opened as
shown below.
7. Click “ Start (S) ” on the “ Main Panel ”. (If you want to quit here, click “ Exit ”. If you want to return again to the
“ Setup Panel ”, click “ Setup(Z) ”.)
8. After erasing of the flash memory, the new software will be written to the flash memory. During the processing,
the progress status can be confirmed by means of the “ Process ” indicator. If the indicator should not advance
for some reason, click “ Emergency stop(C) ” to stop the work, connect again, and confirm the settings.
9. When erasing and writing of the flash memory is completed, the “Process” indicator reaches 100%, and a
black dot appears for “ Waiting to start or Complete ” of “ Operating information ”. (Next page)
10. When the above status is reached, click “ Exit(X) ” to end the program.
11. When the version upgrade is completed, turn off the power of the AJ-D455P and remove the version up
tool.
12. Turn on the AJ-D455 power again and press the buttons “ PLAY ” and “ STOP ” at the front panel
simultaneously to confirm that the version has been upgraded.