Panasonic AJ-D455P, Service Manual

Page: 165 / 743

INF-40
F00: VIDEO ADJUST
Item Set value
No.
SUPER
DISP.
No.
SUPER
DISP.
Setting contents and
outline function explanation
BACK
-UP
Remarks
F03 VIDEO MUTE 0
1 NORMAL
MUTE
Select whether the VIDEO output is to be made gray or not
0:Normal output
1:Forced gray output
No
F06 EE TEST MODE 0
1
NORMAL
DCI RT
EE check for the entire signal processing system
0:Bus EE (EE1)
1:Full EE (EE2)
No
F11 V SETUP 0
1 OFF
ON
Switching of effective/not effective for SETUP MENU 613: SETUP
0:SETUP-MENU 613: SETUP
is not displayed and THRU is sent forcibly to AV. However, the
backup value does not change.
(Shipping setting for T)
1:SETUP-MENU 613: SETUP
is displayed and the set value is sent to AV.
(Shipping setting for P, E, EG)
Yes
F17 GAP COUNT
0
|
40
|
64
0
|
40
|
64
Setting of the GAP count for DVPRO I/F
Yes
G00: AUDIO ADJUST
Item Set value
No.
SUPER
DISP.
No.
SUPER
DISP.
Setting contents and
outline function explanation
BACK
-UP
Remarks
G01 REF_LEVEL1 0
1
2 FS-20
FS-18
FS-12
Selection of the audio I/O reference level
0: Full scale -20 dB
1: Full scale -18 dB
2: Full scale -12 dB
• Change of the set value is possible only when G02: REF_LEVEL2
= 0 dB has been set.
Yes
G02 REF_LEVEL2 0
1 0dB
-3dB
Selection of the SETUP MENU set value for switching of the audio I/O
reference level.
700:CH1 IN LV 703:CH1 OUT LV
701:CH2 IN LV 704:CH2 OUT LV
0: 4 dB/0 dB/-20dB/-60dB switching is possible.
1: Fixed to -3 dB
• Set value change is possible only when G01:REF LEVEL 1 = FS-18
has been set.
Yes
G03 REF LV INI 0
1 0dB
4dB Setting of the factory default value of the SETUP MENU for audio I/O
reference level switching.
700:CH1 IN LV 703:CH1 OUT LV
701:CH2 IN LV 704:CH2 OUT LV
0: 0 dB (Shipping setting for oversea)
1: 4 dB (Shipping setting for JAPAN)
Yes
G08 AUD PB MODEI 0
1
MODE1
MODE2
Setting of audio playback mode
0: NOMAL Mode
1: Setting is carried out when directly editing the jointed tape on
which recording was performed with a cam coder or playing back
the edited tape.
Yes
G09 LINE OUT CUE 0
1 OFF
ON
Setting whether “CH1/CH2 OUTPUT terminal” can be selected is
forcibly as the CUE output signal.
Yes