Panasonic AJ-CX4000, Operating Instructions Manual

Page: 91 / 223

– 91 –
Chapter 4 Operation — Menu settings
The items that can be set are as follows.
f [ON], [OFF]
(Factory setting: [ON])
[SDI OUT1 MARKER]
[CENTER MARKER]
Switch the type of the center marker.
[1] + (large)
[2] Open center (large)
[3] + (small)
[4] Open center (small)
[OFF] Does not display.
(Factory setting: [1])
[SAFETY MARKER]
Selects the type of frame for the safety zone marker.
[1] Box
[2] Corners
[OFF] Does not display.
(Factory setting: [2])
[SAFETY AREA]
Sets the size of the safety zone marker.
It can be set in 1% steps with the ratio of length to width constant.
The items that can be set are as follows.
f [80%]…[100%]
(Factory setting: [90%])
[FRAME MARKER]
Sets the aspect ratio of the frame marker. The frame marker is not displayed when [OFF] is selected.
The items that can be set are as follows.
f [4:3], [13:9], [14:9], [1.85:1], [2.35:1], [OFF]
(Factory setting: [OFF])
[FRAME COLOR]
Sets the color of the frame marker.
The items that can be set are as follows.
f
[WHITE], [BLACK], [RED], [GREEN], [BLUE], [YELLOW]
(Factory setting: [WHITE])
[SDI OUT2 MARKER]
[CENTER MARKER]
Switch the type of the center marker.
[1] + (large)
[2] Open center (large)
[3] + (small)
[4] Open center (small)
[OFF] Does not display.
(Factory setting: [1])
[SAFETY MARKER]
Selects the type of frame for the safety zone marker.
[1] Box
[2] Corners
[OFF] Does not display.
(Factory setting: [2])
[SAFETY AREA]
Sets the size of the safety zone marker.
It can be set in 1% steps with the ratio of length to width constant.
The items that can be set are as follows.
f [80%]…[100%]
(Factory setting: [90%])