Shooting
47
Operation is not possible even if only one of
the inserted cards is DIR ENTRY NG CARD.
(Page 91)
After interval recording has started, a
recordable P2 card cannot be used even if it
is inserted into an empty slot.
The slots for recording in this mode are
indicated by the orange P2 card access
lamps.
The slots for recording P2 cards that are
inserted after starting recording are indicated
by the green P2 card access lamps.
Text memos cannot be added.
One-shot recording (ONE-SHOT REC)
This function records a single shot at each unit of
TIMEWHICHHASBEENSET
1
Check that the settings given on page 46
have been established for the OPERATION
TYPE item and recording format.
2
Select ONE SHOT under REC FUNCTION.
(Page 104)
For menu operations (Page 94)
3
Set the recording time using ONE-SHOT
TIME. (Page 104)
4
0RESSTHE34!2434/0BUTTON
Recording continues for the duration set in
step 2 and then goes on standby.
To stop operation, push the Operation lever in
the
g
direction.
4ORELEASESTANDBYEITHERTURNOFFTHEUNITmS
POWERORSELECT./2-!,UNDER2%#
FUNCTION.
4HEFOLLOWINGDISPLAYSWILLAPPEARONTHELEFT
of the operation status display.
7HILERECORDINGISUNDERWAY)2%#LIGHTSUP
In temporary standby: I-PAUSE lights up.
While recording is stopped: The “I-” of
)0!53%ÛASHES
4HEPRERECORDINGFUNCTIONDOESNOTWORK
No sound is recorded.
!LLDATARECORDEDWHILETHISMODEISACTIVE
WILLBECONTAINEDINONEÚLE
.OGUARANTEESAREMADEFORTHEOUTPUT
images.
Operation is not possible even if only one of
the inserted cards is DIR ENTRY NG CARD.
(Page 91)
•
•
•
•
•
•
•
•
•
•
•
When continuous one-shot recording
is performed, there may be delays in
ACKNOWLEDGINGTHERECORDINGOPERATION
After one-shot recording has started, a
recordable P2 card cannot be used even if it
is inserted into an empty slot.
The slots for recording in this mode are
indicated by the orange P2 card access
lamps.
The slots for recording P2 cards that are
inserted after starting recording are indicated
by the green P2 card access lamps.
Text memos cannot be added.
Loop recording (LOOP REC)
4HISFUNCTIONISUSEDTORECORDÚRSTONONECARD
ANDTHENONTHENEXTWHENYOUHAVEINSERTEDTWO
P2 cards into the card slots. If there is not enough
free memory remaining on the second card,
RECORDINGRETURNSTOTHEÚRSTCARDWHOSEDATAWILL
THENBEOVERWRITTEN7HENDATAISOVERWRITTENTHE
SAVEDCLIPSAREDELETEDANDTHENTHENEWCLIPSARE
recorded in their place. (Clip deletion is performed
APPROXIMATELYSECONDSBEFORETHEOVERWRITE
1
Check that the settings given on page 46
have been established for the OPERATION
TYPE item and recording format.
2
Select LOOP under REC FUNCTION.
(Page 104)
For menu operations (Page 94)
3
0RESSTHE34!2434/0BUTTON
Recording starts.
To stop operation, press the START/STOP
button.
To release the function, either turn off the
UNITmSPOWERORSELECT./2-!,UNDER2%#
FUNCTION.
4HEFOLLOWINGDISPLAYSWILLAPPEARONTHELEFT
of the operation status display.
7HILERECORDINGISUNDERWAY,2%#LIGHTS
up.
While recording is stopped: L-PAUSE lights
up.
)NSUFÚCIENTMEMORYSPACE,!#+,ÛASHES
5SETWO0CARDSEACHWITHARECORDING
capacity of more than one minute. Recording
STOPSWHENEITHERCARDISEJECTED
(Continued on the next page)
•
•
•
•
•
•
•
•
