28
Basic shooting operations (continued)
Remove the P2 card
1
,IFTUPTHEVIEWÚNDERPRESSTHESIDEOFTHE
card slot cover (
A
), and slide the cover (
B
)
to open it.
2
Check that the P2 card access lamp is not
blinking orange.
3
2AISETHE0CARDEJECTBUTTONANDPRESSIT
4
Remove the P2 card.
4
3
P2 card
access lamp
0CARDEJECT
button
$ONOTEJECTTHE0CARDORTURNTHEPOWEROFF
UNDERTHEFOLLOWINGCIRCUMSTANCESSINCEDOING
so may cause a malfunction in the card:
1) While the orange P2 card access lamp is
blinking after the card is inserted (and until it
stops blinking).
$URINGRECORDINGDURINGTHERECORDINGÚNISH
PROCESSORWHILETHEACCESSLAMPISBLINKING
)FA0CARDISEJECTEDDURINGFORMATTINGORWHILE
its data is being accessed, “TURN POWER
/&&oAPPEARSINTHEVIEWÚNDERANDAWARNINGIS
indicated by the tally lamp. If this happens, turn
THEPOWEROFFANDBACKONAGAIN
When a card is ejected during formatting:
Format the card again.
7HENACARDISEJECTEDWHILEITSDATAISBEING
accessed:
4HECLIPSMAYBETHROWNOUTOFORDER
(Page 57) Check the clips and repair them.
(For details on repairing clips, see page 68.)
Immediately after pre-recording, a P2
CARDINSERTEDINTOANEMPTYSLOTWILLNOTBE
IMMEDIATELYRECOGNIZED
•
•
•
•
•
During playback, a P2 card inserted into the
EMPTYSLOTWILLNOTBERECOGNIZEDANDTHE0
CARDACCESSLAMPWILLNOTLIGHT7HENPLAYBACKIS
COMPLETEDTHE0CARDRECOGNITIONWILLBEGIN
You can use ACCESS LED on the OTHER
FUNCTIONS screen to set the P2 card access
LAMPSSOTHATTHEYWILLALWAYSBEOFF)NTHISCASE
EITHERTURNOFFTHEPOWERORWAITUNTILENOUGHTIME
has passed after inserting the cards or stopping
operation before ejecting the cards.
)FA0CARDISEJECTEDWHILETHUMBNAILSARE
displayed, the thumbnail screen is released.
Cautions in using P2 cards
"EFOREUSINGA0CARDBESURETOFORMATITWITH
a P2 device.
•
•
•
