manualshive.com logo in svg

Panasonic AGHPX170P - MEMORY CARD CAMERA RECORDER, Operating Instructions Manual

Share
Download
Panasonic AGHPX170P - MEMORY CARD CAMERA RECORDER Operating Instructions Manual Download Page 15

Prepar

ation

15

The battery

Charging

"EFOREUSINGTHEBATTERYFULLYCHARGEITWITHTHE!#

adapter.

+EEPASPAREBATTERYWITHYOU

1

  Align the battery with the 

 marking on 

THE!#ADAPTERPLACEITÛATANDSLIDEITIN

the direction shown below.

You cannot charge the battery if the DC cord 
is connected to the DC OUT connector, so 

DISCONNECTITÚRST

2

  Plug the AC cord into the power outlet.

The POWER lamp and CHARGE lamp on 
the AC adapter light, and charging begins.

)FTHE#(!2'%LAMPDOESNOTLIGHTWHEN

attached, detach the battery and then attach 
it again.

CHARGE

POWER

When the battery is charged, the CHARGE 
lamp on the AC adapter goes out.

3

  Slide the battery and remove it.

•

•

•

•

Recording time of included battery

Capacity

Recharging 

time

Continuous 

recording time

5400 mAh

!PPROX

min.

!PPROX

min.

4HETIMESGIVENABOVEAREAPPROXIMATEFORWHEN
SCENESARESHOTINTHE$6#02/($MODEWHILE

not using the LCD monitor.

4HETIMESAPPLYWHENTHEAMBIENTOPERATING

temperature is 68°F (20°C) and humidity is 60%.
Charging may take longer at other temperatures 
and humidity levels.

+EEPMETALOBJECTSSUCHASNECKLACES

and hairpins) away from the battery. 
Shortcircuiting may occur across the 
terminals, causing the battery to heat up, 
and you may seriously burn yourself if you 
touch the battery in this state.

4HEBATTERYBECOMESHOTWHILEITISBEING

used or charged. The camera-recorder itself 
also becomes hot during use.
The recordable time reduces if you repeatedly 
start and stop recording.
Discharge the battery before storing it. When 
storing it for an extended time, charge it at 
least once a year, use up its charge in the 
camerarecorder, and then store it again.
If the battery is extremely hot or cold, the 

#(!2'%LAMPWILLBLINKSEVERALTIMESBEFORE

charging starts.
If the CHARGE lamp continues to blink even 

WHENTHEBATTERYTEMPERATUREISNORMALTHERE
MAYBESOMETHINGWRONGWITHTHEBATTERYOR

AC adapter. Contact your dealer.

4HEBATTERYTAKESLONGERTOCHARGEWHENITIS
WARM
4HE!#ADAPTERCANINTERFEREWITHRADIO

reception so keep radios at least 1 meter 

AWAYFROMIT
4HE!#ADAPTERMAYMAKESOMENOISEWHEN

you are using it, but this is normal.

9OUCANNOTCHARGETHEBATTERYWHEN
SUPPLYINGPOWERTOTHECAMERARECORDERFROM

the AC adapter.
Operation of battery pack CGR-D16 (1600 
mAh) (sold separately) is not guaranteed.

•

•

•

•

•

•

•

•

•

•

•

•

•

Preparation

Summary of Contents for AGHPX170P - MEMORY CARD CAMERA RECORDER































































Reviews:

No comments

Brands by name

Popular brands

Load more brands