Panasonic AGHPG20 - P2 GEAR PLAY/REC Page 112 Operating Instructions Manual Download

Page: 112 / 120

Troubleshooting (Q&A) (continued)

Playback

Mosaic-like noise appears

during rapid forward or

rapid reverse playback.

This phenomenon is characteristic of digital equipment. It is not a

sign of trouble.

•

—

No playback pictures

appear even though the TV

set is connected properly.

Is the input selector on the TV set at the “video input” position?

Carefully read the instructions accompanying the TV set, and select

the connected video input connector.

•

—

No playback sound is heard

from the unit’s speaker.

Has the unit’s volume level been turned down too low? Press the

PAGE/AUDIO MON/VAR “+” button, and adjust the volume level.

No sound can be heard from the speaker when headphones are

connected to the headphone jack.

•

P 82

—

No hot swap playback.

This unit does not support hot swap playback. To continue

playback, stop playback, and then replace the P2 card with another

card.

•

P 64

SD card

Data cannot be read on the

SD card.

Has the SD card been formatted properly? Format the card using

the unit.

•

P 33

Software information for this product

1. Customer advisory: This product includes software licensed under the GNU General Public License

(GPL) and GNU Lesser General Public License (LGPL); customers have the right to download, modify,
and redistribute source code for this software.

Descriptions of the GPL and LGPL are stored on the installation CD included with this camera-recorder.
See the folder named \LDOC. (The description is the original (written in English)) To download the

relevant source code, visit https://eww.pavc.panasonic.co.jp/pro-av/

Please note that we cannot answer any questions you may have about the content, etc. of any source

code you may obtain from the above Web site.

2. This product includes software licensed under the MIT License. A description of the MIT is stored on

the installation CD included with this portable recorder. See the folder named \LDOC. (The description
is the original (written in English))

Summary of Contents for AGHPG20 - P2 GEAR PLAY/REC

























































































































Search results

Summary of Contents for AGHPG20 - P2 GEAR PLAY/REC

Reviews:

Related manuals for AGHPG20 - P2 GEAR PLAY/REC

Brands by name

Popular brands

Panasonic AGHPG20 - P2 GEAR PLAY/REC, Operating Instructions Manual

Search results

Summary of Contents for AGHPG20 - P2 GEAR PLAY/REC

Reviews:

Related manuals for AGHPG20 - P2 GEAR PLAY/REC

Brands by name

Popular brands