– 13 –
Filming and setting the camera remotely (Windows)
You can remotely operate the camera from the computer to film videos and capture still images.
• Filming a video remotely
: Make a video from a camera whose image is being displayed. (Explained below)
• Taking still images remotely : Take and save still images to a specified folder on the computer.
• Camera settings
: Configure the shooting and the other settings of the camera.
Filming a video remotely
Operate the computer to save videos on the camera
*
.
*
The save destination can be either the internal storage of a tablet connected to a USB camera or a microSD card installed to the tablet.
The save destination can be selected on the camera. See the instruction manual of the Wearable Camera LiveCast for more details.
With AG-WN5K1 cameras, the videos are saved to a microSD card installed to the camera.
Preparation
• Display the video display screen (single screen).
1
Click
.
• The button changes to
and the camera starts filming.
●
Note
• During filming, click
to send an instruction to the camera to add a mark to the video at the time the instruction
was sent.
Click this icon when filming is stopped to start filming with the camera and add a mark at the beginning of the video.
• Marks cannot be added with AG-WN5K1 cameras.
2
Click
.
• The button returns to
and the filming is stopped.
The video is saved to the camera.
●
Note
• If filming is not possible, check the available space in the microSD card or the internal storage.
• Closing the Liveviewer does not stop the filming. To stop the filming, click
or stop the filming operation directly on
the camera.
