Panasonic AG-HPX300P Operating Instructions Manual Download Page 115

Page: 115 / 166

Chapter

Manipulating

Clips

with
Thumbnails

Formatting SD memory cards

SD memory cards can also be formatted from the
thumbnail screen. With an SD memory card inserted into
the unit, perform the following operation:

PresstheTHUMBNAILbutton.

• The thumbnail screen appears on the LCD

monitor.

PresstheTHUMBNAILMENUbuttonand
selectOPERATION



FORMATfromthe

thumbnailmenu.

• Select “SD CARD” and press the SET button when

the screen shown below appears.

• Select “EXIT” if formatting is not required.

Thefollowingscreenappears.Usethecursor
buttonsandtheSETbuttontoselectYES.

• The SD memory card is formatted.



NOTE

• You can also use the menu option SD CARD FORMAT in the

CARD FUNCTIONS screen to format SD memory cards.

For details, refer to [Formatting, Writing and Reading an SD
memory card] (page 81).

• Check that no important data remains on a card before

formatting since data erased by formatting cannot be
recovered.

Setting the Thumbnail Display
Mode

The thumbnail display mode can be customized to suit
your preferences.

PresstheTHUMBNAILbutton.

• The thumbnail screen appears on the LCD

monitor.

PresstheTHUMBNAILMENUbuttonand
selectTHUMBNAIL



SETUPfromthe

thumbnailmenu.

• The following screen appears.

INDICATOR:

Select which indicators you want to show on
thumbnails and which you want to hide.

• ALL HIDE:

ON:

No indicators are displayed.

OFF:

Indication/No indication will be set
depending on the following menu.
The factory settings are as follows.

• MARKER:

Switches the shot mark marker between
indication and no indication (ON/OFF). The
factory setting is ON (indication).

• TEXT MEMO:

Switches the text memo marker between
indication and no indication (ON/OFF). The
factory setting is ON (indication).

• WIDE:

Switches the wide marker between indication
and no indication (ON/OFF). The factory
setting is ON (indication).

• PROXY:

Switches the proxy marker between
indication and no indication (ON/OFF). The
factory setting is ON (indication).

DATA DISPLAY:

The time display field of the clip offers a choice
of Time Code (TC), User Bits (UB), Shooting
Time (TIME), Shooting Date (DATE), Shooting
Date and Time (DATE/TIME) or USER CLIP
NAME. The factory setting is Time Code.

Summary of Contents for AG-HPX300P







































































































































































Search results

Summary of Contents for AG-HPX300P

Reviews:

Related manuals for AG-HPX300P

Brands by name

Popular brands

Panasonic AG-HPX300P, Operating Instructions Manual

Search results

Summary of Contents for AG-HPX300P

Reviews:

Related manuals for AG-HPX300P

Brands by name

Popular brands