Panasonic AG-HPX171EJ Operating Instructions Manual Download Page 7

Page: 7 / 132

ENGLISH

E-

To remove the battery

Main Power Battery
(Refer to page 18 for the detail.)

Press the battery removal button.

Battery removal button

Remote Control Battery

While pressing the stopper

, pull out the

battery holder.

Remove the button-type battery from the battery

holder.

PHD 5 Year Warranty Repair Program

Thank you for purchasing this Panasonic PHD device.

Register as a user for this device to receive a special service warranty up to five years of free warranty

repairs.

Customers who register as users on the website will receive a extended warranty repair

valid for up to five years.

1st year

nd year

3rd year

th year

5th year

PHD device

Basic warranty

Extended warranty repair

*1: Please note that this extended warranty is not available in some countries/regions see web

site below for details. *: Not all models eligible for extended warranty coverage. *3: The basic

warranty period may vary depending on the country/region see enclosed warranty for warranty

coverage. *: Not all repair work is covered by this extended warranty see enclosed warranty

card for warranty coverage. *5: The maximum warranty period may be adjusted depending on

the number of hours the device has been used.

Purchase

P2 product

within 1 month

“Registration Notice”

e-mail sent

Free 5 years of Warranty Repairs

Make sure to save the “Registration Notice”

e-mail during the warranty period.

Details about user registration and the extended warranty:

http://panasonic.biz/sav/pass_e

ENGLISH

GERMAN

FRENCH

ITALIAN

SPANISH

Pursuant to at the directive 2004/108/EC, article 9(2)

Panasonic Testing Centre

Panasonic Service Europe, a division of Panasonic Marketing Europe GmbH

Winsbergring 15, 22525 Hamburg, F.R. Germany

Entsprechend der Richtlinie 2004/108/EG, Artikel 9(2)

Panasonic Testing Centre

Panasonic Service Europe, eine Abteilung der Panasonic Marketing Europe GmbH

Winsbergring 15, 22525 Hamburg, Deutschland

En accord avec la directive 2004/108/EC, article 9(2)

Panasonic Testing Centre

Panasonic Service Europe, une division de Panasonic Marketing Europe GmbH

Winsbergring 15, 22525 Hamburg, F.R. Allemagne

In conformità con la direttiva 2004/108/CE, articolo 9(2)

Panasonic Testing Centre

Panasonic Service Europe, un reparto di Panasonic Marketing Europe GmbH

Winsbergring 15, 22525 Hamburg, F.R. Germania

Conforme a la directiva 2004/108/EC, artículo 9(2)

Panasonic Testing Centre

Panasonic Service Europe, una división de Panasonic Marketing Europe GmbH

Winsbergring 15, 22525 Hamburg, F.R. Alemania

Summary of Contents for AG-HPX171EJ





































































































































Search results

Summary of Contents for AG-HPX171EJ

Reviews:

Panasonic AG-HPX171EJ, Operating Instructions Manual, Page: 7 / 132

Search results

Summary of Contents for AG-HPX171EJ

Reviews: