E-10
Operating precautions
Do not allow any water to get into the camera-
recorder when using it in the rain or snow or at
the beach.
Failure to heed this precaution will cause the
camera-recorder or P2 card to malfunction (and
may result in irreparable damage).
Keep the camera-recorder away from
equipment (such as TV sets and video game
machines) that generate electromagnetic fields.
Using the camera-recorder on top of or near a
TV set may cause distortion in the images and/or
sound due to the electromagnetic waves that the
set emits.
The powerful magnetic fields generated by
speakers or large motors may damage your
recordings or distort the images.
The electromagnetic waves emitted from
a microcomputer will adversely affect the
camerarecorder, causing the images and/or
sound to be distorted.
If the camera-recorder is so adversely affected by
products that generate magnetic fields that it no
longer operates properly, turn it off and remove
the battery or unplug the AC adaptor from the
power outlet. Then install the battery again or
reconnect the AC adaptor. After this, turn the
camera-recorder back on.
Do not use the camera-recorder near radio
transmitters or high-voltage equipment.
Using the camera-recorder near a radio
transmitter or high-voltage equipment may
adversely affect the recorded images and/or
sound.
Do not allow any sand or dust to get into the
camera-recorder when using it at the beach
and other similar places.
Sand and dust can damage the camera-recorder
and P2 card. (Be especially careful when
inserting or removing the P2 card.)
Battery charger and battery
If the battery is extremely hot or cold, the
CHARGE lamp will blink several times before
charging starts.
If the CHARGE lamp continues to blink even
when the battery temperature is normal, there
may be something wrong with the battery or
battery charger. Contact your dealer.
The battery takes longer to charge when it is
warm.
•
•
•
•
•
•
•
•
•
•
The battery charger can interfere with radio
reception so keep radios at least 1 meter away
from it.
The battery charger may make some noise when
you are using it, but this is normal.
Take precautions not to drop the camera when
moving it.
Strong impacts may damage the camera and
cause it to stop working.
Handle the camera with care, using the hand
strap or shoulder strap to carry it.
Do not spray the camera with insect sprays or
other volatile substances.
These can warp the camera or cause the finish
to come off.
Do not leave the camera-recorder in contact with
rubber or PVC products for extended periods of
time.
After use, remove the battery and disconnect
the AC power supply cord.
Battery characteristics
This camera-recorder uses a rechargeable
lithiumion battery that uses its internal chemical
reaction to generate electrical energy. This reaction
is easily influenced by the ambient temperature
and humidity, and the battery’s effective operating
time is reduced as the temperature rises or falls. In
very low temperatures, the battery may last only 5
minutes.
Protective circuitry functions if you use the battery
where it is very hot and you will have to wait before
you can use it again.
Remove the battery after use.
Completely remove the battery. (The battery
continues to be used even if you have turned
the camera off.) The battery can over discharge
if you leave it in the camera and it may become
impossible to recharge it.
Keep dust and other foreign objects away from
the battery terminal.
If the battery is dropped, make sure that the
body and terminal portion of the battery are not
deformed.
If a deformed battery is inserted into the camera-
recorder or placed on the battery charger, the
camera-recorder or battery charger may be
damaged.
•
•
•
•
•
•