Panasonic AG-CX350 Operating Instructions Manual Download

Page: 42 / 216

– 42 –

Chapter 3 Preparation — Preparing the memory card

When the recording mode is AVCHD

SDHC memory cards, SDXC memory cards and microP2 cards can be used.

Recording bit rate or recording function

Speed Class

Example of card display

All

Speed Class 4 or higher

Or the microP2 card A series, microP2 card B series

Preventing unintentional erasing

Writing, erasing and formatting data is prohibited by setting the write-protection switch of the memory card to the LOCK side.

Write-protection switch

Status of the card access lamp and memory card

Card access lamp

Memory card status

Orange (illuminated)

Recording target

Both loading/writing are permitted. Current recording target.

Green (illuminated)

Recording possible

Both loading/writing are permitted.

Orange (flashing)

Accessing card

Loading/writing are currently being performed.

Orange (rapidly flashing)

Recognizing memory card

The memory card is being recognized.

Error

An error has occurred. This will flash even if the memory card is not

inserted when an error has occurred.

Green (slowly flashing)

No remaining recording capacity

No recording capacity left on the memory card. Only loading is possible.

Write-protected

The write-protection switch of the memory card is set to the LOCK side.

Recording not possible

It cannot record with the recording format that is currently set. Change

the recording format or use a memory card compatible with the recording

format to record.

Off

No memory card inserted

A memory card has not been inserted.

Illegal format

It is not the correct format. Reformat the card.

Card not supported

This is a card that cannot be used with the camera, such as MMC (Multi

Media Card).

Setting to [NETWORK] menu

→

[NETWORK FUNC]

→

[NDI

HX]

Cannot record and play back. The functions other than recording and

playback (loading of the scene file, etc.) can be used.

microP2 card formatted with

encryption with CPS password

Cannot be used with the camera. When formatted with the camera, it can

be used as a microP2 card that is not encrypted.

During card reader mode

The card 1 access lamp/card 2 access lamp turns off when not

accessing.

NOTE

The card access lamp will not illuminate or flash when the [OTHERS] menu

→

[LED]

→

[ACCESS LED]

→

[OFF] is set.

Summary of Contents for AG-CX350

























































































































































































































Search results

Summary of Contents for AG-CX350

Reviews:

Related manuals for AG-CX350

Brands by name

Popular brands

Panasonic AG-CX350, Operating Instructions Manual

Search results

Summary of Contents for AG-CX350

Reviews:

Related manuals for AG-CX350

Brands by name

Popular brands