![background image](http://html.mh-extra.com/html/panasonic/ag-cx350/ag-cx350_operating-instructions-manual_258842093.webp)
– 93 –
Chapter 4 Operation — Menu settings
[HOLD]
Enables the enlarged display function until the <FOCUS ASSIST> button assigned to [EXPAND] or the USER button is
pressed or the USER button icon is touched again.
[UNTIL REC]
Enables the enlarged display function until performing recording operation.
(Factory setting: [10SEC])
[EXPAND VALUE]
Adjusts the enlargement factor of the enlarged display function.
The items that can be set are as follows.
f
[
×
2], [
×
3], [
×
4]
(Factory setting: [
×
2])
[PEAKING LEVEL]
Sets the intensity of the peaking display.
The items that can be set are as follows.
f
[LOW], [MID], [HIGH]
(Factory setting: [MID])
[PEAKING COLOR]
Sets the color of the peaking display.
The items that can be set are as follows.
f
[RED], [GREEN], [WHITE]
(Factory setting: [RED])
[BLACK & WHITE]
Enables/disables the monochrome display.
[ON]
Enables the monochrome display.
[OFF]
Disables the monochrome display.
[DURING PEAKING]
Enables the monochrome display while the peaking display is enabled.
(Factory setting: [OFF])
[DETAIL]
Sets the intensity of the contour for the video to make it easier to focus.
The items that can be set are as follows.
f
[ON], [OFF]
(Factory setting: [ON])
[DETAIL LEVEL]
Sets the intensity of the contours.
The items that can be set are as follows.
f
[
−
3]…[3]
(Factory setting: [0])
[DETAIL FREQ.]
Adjusts the frequency of the contour highlights.
The items that can be set are as follows.
f
[HIGH], [LOW]
(Factory setting: [LOW])
[EI ASSIST]
[ZEBRA]
Sets whether to superimpose the zebra signal to the output.
[MOMENT]
Press the USER button to which [ZEBRA] is assigned or touch the USER button icon to superimpose the zebra signal for
approximately five seconds.
[ON]
Always superimposes the zebra signal. Press the USER button to which [ZEBRA] is assigned in the [ON] settings or touch
the USER button icon to set to [OFF].
[OFF]
Does not superimpose the zebra signal. Press the USER button to which [ZEBRA] is assigned in the [OFF] settings or touch
the USER button icon to set to [ON].
(Factory setting: [OFF])
@
@
NOTE
t
The setting is fixed to [OFF] when the [SYSTEM] menu
→
[COLOR SETTING] is set to [V-Log].
[ZEBRA1 DETECT]
Sets the detection level of zebra pattern 1.
The items that can be set are as follows.
f
[0%]…[109%]
(Factory setting: [80%])
Summary of Contents for AG-CX350
Page 10: ...Before using the camera read this chapter Chapter 1 Overview ...
Page 197: ...Maintenance of the camera or frequently asked questions are described Chapter 10 Notes ...
Page 207: ...This chapter describes the specifications of this product Chapter 11 Specification ...
Page 216: ...Web Site http www panasonic com Panasonic Corporation 2019 ...