10
Part Names and Functions
Front Panel
1. POWER switch
2. POWER lamp
This indicates that the main power supply (AC power supply) is
turned on.
3. OPERATE lamp
This indicates that this unit is operating.
This is turned on while this unit is operating with an external DC
input.
This will flash when the fan motor in this unit is stopped.
4. INCOM headset connector
Connect the headset for the intercom.
5. INCOM volume level potentiometer
This is a potentiometer to adjust the volume level of the
intercom.
6. MIC switch
This is the ON/OFF switch for the intercom microphone.
There are three positions: ON/OFF/PTT.
(PTT: Microphone is turned on only while pushed.)
7. TALLY lamp/CALL switch
This is turned on while the TALLY signal is input to this unit.
The TALLY lamp on the camera adapter will be turned on while
this is pressed.
TALLY lamp on the AG-CA300 and the TALLY lamp connected
to the CA_VF terminal of the AG-CA300 will be turned on when
the TALLY signal is input to this unit or when the connected
camcorder is recording, and there will be no change even if the
CALL switch is pressed.
<Note>
The viewfinder connected to the VF terminal of the camcorder
will not turn on even if the CALL switch is pressed.
8. MENU switch
This is a switch to open the MENU to change the setting of this
unit.
9. SELECT switch
This is a switch to select the settings of this unit from the MENU
of this unit.
ON
OFF
PIT
INCOM
INCOM
Base Station AG-BS300
OPERATE
ON
OFF
POWER
TALLY/CALL
MENU
MIC
ON
SEL
LEVEL
PUSH
1
2
3
4
5
6
7
8
9
AG-BS300P_E.book 10 ページ ２００９年６月２５日 木曜日 午後１時１４分
